EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Correlating Uniaxial Compressive Strength with Non-Destructive Testing (NDT) for Marl-Limestone from Taza, Morocco: Implications for Field Geotechnical Characterization

Mohammad Ettayeb, Abdel-Ali Chaouni, Khalid Krami, Imane Raini, Imad Raini

Geotechnics · 29.10.2026 · 6 (4) · 110

DOI: 10.3390/geotechnics6040110 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Geotechnics, online erschienen am 29.10.2026. Verfasst von Mohammad Ettayeb und 4 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Identifying suitable local materials for civil engineering is a key challenge for geotechnical engineers. This study characterises the physico-mechanical properties of Taza marl-limestone (Morocco), focusing on the correlation between uniaxial compressive strength (UCS) and non-destructive tests. Twenty-eight samples from various sites underwent physical, mineralogical and mechanical tests. UCS showed a strong positive correlation with P-wave velocity, Vp (R2 = 0.95; internal leave-one-out cross-validated Q2 = 0.94, RMSE = 2.8 MPa) and a moderate correlation with Schmidt rebound hardness (R2 = 0.79; Q2 = 0.75, RMSE = 5.6 MPa). Eleven published UCS–Vp equations gave much larger errors on the same specimens (RMSE ≥ 11 MPa), partly because the Taza data lie outside their calibration ranges; they therefore cannot be transferred to this material without recalibration. The average CaCO3 content is 75.07%. Degradability and fragmentability tests classified the samples, informing long-term behaviour under mechanical and hydric stress. Within the calibrated ranges, these site-specific correlations enable a preliminary non-destructive evaluation of intact Taza marl-limestone and may support local-material use and field-investigation optimisation. However, predictive performance was only internally cross-validated, and the specimens could not be traced to individual outcrops; independent validation (new specimens, other locations, field and moisture conditions) is therefore required before wider use.

Zitieren

APA

Ettayeb, M., Chaouni, A., Krami, K., Raini, I., & Raini, I. (2026). Correlating Uniaxial Compressive Strength with Non-Destructive Testing (NDT) for Marl-Limestone from Taza, Morocco: Implications for Field Geotechnical Characterization. Geotechnics, 6(4), 110. https://doi.org/10.3390/geotechnics6040110

Vancouver

Ettayeb M, Chaouni A, Krami K, Raini I, Raini I. Correlating Uniaxial Compressive Strength with Non-Destructive Testing (NDT) for Marl-Limestone from Taza, Morocco: Implications for Field Geotechnical Characterization. Geotechnics. 2026;6(4):110. doi:10.3390/geotechnics6040110

BibTeX
@article{Ettayeb2026,
  author = {Ettayeb, Mohammad and Chaouni, Abdel-Ali and Krami, Khalid and Raini, Imane and Raini, Imad},
  title = {Correlating Uniaxial Compressive Strength with Non-Destructive Testing (NDT) for Marl-Limestone from Taza, Morocco: Implications for Field Geotechnical Characterization},
  journal = {Geotechnics},
  year = {2026},
  volume = {6},
  number = {4},
  pages = {110},
  doi = {10.3390/geotechnics6040110}
}
Kostenlos starten →