Geomechanical Assessment of Limestone Deposits Using Uniaxial Compressive and Brazilian Tensile Strength Tests for Engineering Applications.
International Journal of Innovative Science and Research Technology · 25.05.2026 · 1543
DOI: 10.38124/ijisrt/26may730 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Innovative Science and Research Technology, online erschienen am 25.05.2026. Verfasst von Omonaye J. und 3 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben.
Abstract (Originalsprache)
Geomechanical characterization of limestone is critical for assessing its suitability in engineering and construction applications. This study evaluates the mechanical properties of limestone from five locations (A1–A5) using uniaxial compressive strength (UCS) and Brazilian tensile strength (BTS) tests. Representative samples were prepared in accordance with ISRM standards and tested under controlled laboratory conditions. The UCS results range from 31.19 MPa to 68.06 MPa, indicating moderate to high strength variability across the study area. Locations A2 and A5 exhibit relatively higher compressive strength, suggesting more competent and well-cemented limestone, while A3 and A4 show greater variability due to heterogeneity in rock properties. BTS values range from 3.11 MPa to 7.24 MPa, confirming that limestone is significantly weaker in tension than in compression. A consistent relationship between UCS and BTS was observed, with tensile strength representing a small proportion of compressive strength. The results highlight the influence of geological variability on rock strength and emphasize the need for site-specific evaluation. This study provides useful data for geotechnical design, material selection, and rock mass classification in engineering applications.
Zitieren
APA
J., O., M., O. B., A., O. I., & B., G. T. (2026). Geomechanical Assessment of Limestone Deposits Using Uniaxial Compressive and Brazilian Tensile Strength Tests for Engineering Applications. International Journal of Innovative Science and Research Technology, 1543. https://doi.org/10.38124/ijisrt/26may730
Vancouver
J. O, M. OB, A. OI, B. GT. Geomechanical Assessment of Limestone Deposits Using Uniaxial Compressive and Brazilian Tensile Strength Tests for Engineering Applications. International Journal of Innovative Science and Research Technology. 2026:1543. doi:10.38124/ijisrt/26may730
BibTeX
@article{J2026,
author = {J., Omonaye and M., Olaleye B. and A., Okewale I. and B., Gata T.},
title = {Geomechanical Assessment of Limestone Deposits Using Uniaxial Compressive and Brazilian Tensile Strength Tests for Engineering Applications},
journal = {International Journal of Innovative Science and Research Technology},
year = {2026},
pages = {1543},
doi = {10.38124/ijisrt/26may730}
}
EUVIMED