Evaluation of the Water-Blocking Performance of Polyurethane Plugging System and Urea-Formaldehyde Plugging System in Xinjiang Oilfield
Gels · 28.05.2026 · 12 (6) · 469
DOI: 10.3390/gels12060469 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gels, online erschienen am 28.05.2026. Verfasst von Qianbing Lin und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, China University of Petroleum-Beijing at Karamay, Karamay 834000, China. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Department of Xinjiang Uyghur Autonomous Region, 2025 Karamay Innovative Environment Construction Plan (Innovative Talents) Project, China University of Petroleum, Beijing.
Abstract (Originalsprache)
Water channeling during water injection in mid-to-late development stages of low-permeability reservoirs in Xinjiang leads to a rapid water cut increase and reduced oil displacement efficiency, causing significant economic losses. This study systematically investigated two chemical systems—a polyurethane (PU) plugging system and a urea-formaldehyde (UF) plugging system—under simulated Xinjiang reservoir conditions. The PU plugging system formulation was optimized through control variable experiments, and both systems were evaluated for rheological properties, curing behavior, mechanical strength, salinity and temperature adaptability, and plugging performance using sand-pack displacement tests. The optimized PU plugging system cured at 80 °C for 1 h achieved a maximum plugging rate of 96% and a breakthrough pressure gradient of 4.2 MPa·m−1. The UF plugging system exhibited distinct temperature-triggered gelation, with viscosity rising exponentially above 60 °C, providing a plugging rate of 70% and a breakthrough pressure gradient of 1.0–2.0 MPa·m−1, suitable for deep fluid diversion. The PU plugging system offers high-strength near-wellbore plugging, while the UF plugging system enables controllable deep fluid diversion. Their complementary properties provide a comprehensive technical strategy for water channeling control in different low-permeability and high-temperature reservoirs in Xinjiang Oilfield.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Engineering, China University of Petroleum-Beijing at Karamay, Karamay 834000, China.
- Xinjiang Key Laboratory of Multi-Medium Pipeline Safety Transportation, Karamay 834000, China.
ORCID-Profile: Lianghui Guo
Förderung
- Science and Technology Department of Xinjiang Uyghur Autonomous Region
- 2025 Karamay Innovative Environment Construction Plan (Innovative Talents) Project
- China University of Petroleum, Beijing
- Open fund project of Key Laboratory for EOR of fractured vuggy reservoirs of Sinopec in 2025
- Xinjiang Tianshan Innovation Team for Research and Application of High-Efficiency Oil and Gas Pipeline Transportation Technology
- Xinjiang Uygur Autonomous Region Disease Prevention and Control Center
- National Natural Science Foundation of China
- Natural Science Foundation of Xinjiang Uygur Autonomous Region
Zitieren
APA
Lin, Q., Chen, G., Dong, R., Cui, X., Zhang, S., Li, D., Li, X., & Guo, L. (2026). Evaluation of the Water-Blocking Performance of Polyurethane Plugging System and Urea-Formaldehyde Plugging System in Xinjiang Oilfield. Gels, 12(6), 469. https://doi.org/10.3390/gels12060469
Vancouver
Lin Q, Chen G, Dong R, Cui X, Zhang S, Li D, et al. Evaluation of the Water-Blocking Performance of Polyurethane Plugging System and Urea-Formaldehyde Plugging System in Xinjiang Oilfield. Gels. 2026;12(6):469. doi:10.3390/gels12060469
BibTeX
@article{Lin2026,
author = {Lin, Qianbing and Chen, Guanyu and Dong, Ruiqiang and Cui, Xinyue and Zhang, Shiyu and Li, Daoyong and Li, Xinzhe and Guo, Lianghui},
title = {Evaluation of the Water-Blocking Performance of Polyurethane Plugging System and Urea-Formaldehyde Plugging System in Xinjiang Oilfield},
journal = {Gels},
year = {2026},
volume = {12},
number = {6},
pages = {469},
doi = {10.3390/gels12060469}
}
EUVIMED