EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bonding Performance of Melamine–Urea–Formaldehyde and Polyurethane Adhesives for Laminated Hybrid Beams and Their Selected Mechanical Properties

Andrej Fašalek, Aleš Straže, Bogdan Šega, Johannes A. J. Huber, Milan Šernek

Buildings · 17.08.2023 · 13 (8) · 2087

DOI: 10.3390/buildings13082087 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 17.08.2023. Verfasst von Andrej Fašalek und 4 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Higher Education, Science and Innovation of the Republic of Slovenia, Ministry of Agriculture, Forestry and Food of the Republic of Slovenia, Slovenian Research Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Beech (Fagus Sylvatica L.) is a prevalent tree species in Slovenia and is suitable for manufacturing glulam beams. However, beech wood has certain limitations that can potentially be mitigated by combining it with Norway spruce (Picea abies (L.) Karst.) wood to create hybrid beams. This study aimed to determine the bonding performance of commonly used melamine–urea–formaldehyde and polyurethane adhesives for these hybrid beams. Moreover, how varying the proportion of beech wood in a hybrid beam affects its mechanical properties was examined. Shear and delamination tests (method B) were conducted, and EN 14080:2013 requirements were met in all cases. The four-point bending tests of the beams showed that hybrid beams containing 20% of beech wood in the cross-sectional height on each side of the neutral axis exhibited a similar modulus of elasticity values as pure beech beams, but their strength was not equally improved. Hybrid beams with 11% of beech wood did not show any improvement in bending stiffness or strength compared to pure spruce beams. It was noted that the presence of beech wood in a hybrid beam can influence its failure mode. Furthermore, analytical calculations showed that a symmetrical lay-up is preferable to an asymmetrical one to increase the effective modulus of elasticity.

Förderung

  • Ministry of Higher Education, Science and Innovation of the Republic of Slovenia
  • Ministry of Agriculture, Forestry and Food of the Republic of Slovenia
  • Slovenian Research Agency

Zitieren

APA

Fašalek, A., Straže, A., Šega, B., Huber, J. A. J., & Šernek, M. (2023). Bonding Performance of Melamine–Urea–Formaldehyde and Polyurethane Adhesives for Laminated Hybrid Beams and Their Selected Mechanical Properties. Buildings, 13(8), 2087. https://doi.org/10.3390/buildings13082087

Vancouver

Fašalek A, Straže A, Šega B, Huber JAJ, Šernek M. Bonding Performance of Melamine–Urea–Formaldehyde and Polyurethane Adhesives for Laminated Hybrid Beams and Their Selected Mechanical Properties. Buildings. 2023;13(8):2087. doi:10.3390/buildings13082087

BibTeX
@article{Faalek2023,
  author = {Fašalek, Andrej and Straže, Aleš and Šega, Bogdan and Huber, Johannes A. J. and Šernek, Milan},
  title = {Bonding Performance of Melamine–Urea–Formaldehyde and Polyurethane Adhesives for Laminated Hybrid Beams and Their Selected Mechanical Properties},
  journal = {Buildings},
  year = {2023},
  volume = {13},
  number = {8},
  pages = {2087},
  doi = {10.3390/buildings13082087}
}
Kostenlos starten →