EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hydrogel Extrusion Speed Measurements for the Optimization of Bioprinting Parameters

Stelian Arjoca iD, Florina Bojin iD, Monica Neagu iD, Andreea Păunescu, Adrian Neagu iD, Virgil Păunescu

Gels · 27.01.2024 · 10 (2) · 103

DOI: 10.3390/gels10020103 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 27.01.2024. Verfasst von Stelian Arjoca und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Functional Sciences, Victor Babes University of Medicine and Pharmacy Timisoara, 300041 Timisoara, Romania. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Victor Babes University of Medicine and Pharmacy Timisoara.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional (3D) bioprinting is the use of computer-controlled transfer processes for assembling bioinks (cell clusters or materials loaded with cells) into structures of prescribed 3D organization. The correct bioprinting parameters ensure a fast and accurate bioink deposition without exposing the cells to harsh conditions. This study seeks to optimize pneumatic extrusion-based bioprinting based on hydrogel flow rate and extrusion speed measurements. We measured the rate of the hydrogel flow through a cylindrical nozzle and used non-Newtonian hydrodynamics to fit the results. From the videos of free-hanging hydrogel strands delivered from a stationary print head, we inferred the extrusion speed, defined as the speed of advancement of newly formed strands. Then, we relied on volume conservation to evaluate the extrudate swell ratio. The theoretical analysis enabled us to compute the extrusion speed for pressures not tested experimentally as well as the printing speed needed to deposit hydrogel filaments of a given diameter. Finally, the proposed methodology was tested experimentally by analyzing the morphology of triple-layered square-grid hydrogel constructs printed at various applied pressures while the printing speeds matched the corresponding extrusion speeds. Taken together, the results of this study suggest that preliminary measurements and theoretical analyses can simplify the search for the optimal bioprinting parameters.

Schlagwörter

Stichwörter der Autor:innen

extrusion-based bioprintinghydrogel flow ratepneumatic extrusionprinting speed

Autor:innen und Institutionen

  • Department of Functional Sciences, Victor Babes University of Medicine and Pharmacy Timisoara, 300041 Timisoara, Romania.
  • Center for Modeling Biological Systems and Data Analysis, Victor Babes University of Medicine and Pharmacy Timisoara, 300041 Timisoara, Romania.
  • OncoGen Institute, 300723 Timisoara, Romania.
  • Carol Davila University of Medicine and Pharmacy Bucharest, 050474 Bucharest, Romania.
  • Department of Physics and Astronomy, University of Missouri, Columbia, MO 65211, USA.

ORCID-Profile: Stelian Arjoca, Florina Bojin, Monica Neagu, Adrian Neagu

Förderung

  • Victor Babes University of Medicine and Pharmacy Timisoara

Zitieren

APA

Arjoca, S., Bojin, F., Neagu, M., Păunescu, A., Neagu, A., & Păunescu, V. (2024). Hydrogel Extrusion Speed Measurements for the Optimization of Bioprinting Parameters. Gels, 10(2), 103. https://doi.org/10.3390/gels10020103

Vancouver

Arjoca S, Bojin F, Neagu M, Păunescu A, Neagu A, Păunescu V. Hydrogel Extrusion Speed Measurements for the Optimization of Bioprinting Parameters. Gels. 2024;10(2):103. doi:10.3390/gels10020103

BibTeX
@article{Arjoca2024,
  author = {Arjoca, Stelian and Bojin, Florina and Neagu, Monica and Păunescu, Andreea and Neagu, Adrian and Păunescu, Virgil},
  title = {Hydrogel Extrusion Speed Measurements for the Optimization of Bioprinting Parameters},
  journal = {Gels},
  year = {2024},
  volume = {10},
  number = {2},
  pages = {103},
  doi = {10.3390/gels10020103}
}
Kostenlos starten →