EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Bioprintable Self-Healing Hyaluronic Acid Hydrogel with Cysteamine Grafting for Tissue Engineering

Kasula Nagaraja, Amitava Bhattacharyya iD, Minsik Jung, Dajeong Kim, Mst Rita Khatun, Insup Noh iD

Gels · 28.11.2024 · 10 (12) · 780

DOI: 10.3390/gels10120780 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 28.11.2024. Verfasst von Kasula Nagaraja und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biomolecular Engineering, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Seoul National University of Science and Technology, Republic of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The abundance of hyaluronic acid (HA) in human tissues attracts its thorough research in tissue regenerating scaffolds and 3D bioprintable hydrogel preparation. Though methacrylation of HA can lead to photo-crosslinkable hydrogels, the catalyst has toxicity concerns, and the hydrogel is not suitable for creating stable complex 3D structures using extrusion 3D bioprinting. In this study, a dual crosslinking on methacrylated HA is introduced, using cysteamine-grafted HA and varying concentrations of 2-hydroxy ethyl acrylate. The resultant hydrogel is suitable for extrusion 3D printing (or bioprinting), mechanically robust, self-standing, stable in phosphate-buffered saline at 37 °C for more than 42 days, has high water absorption capacity with a low swelling ratio (1.5), and exhibits self-healing and adhesive properties. Complex 3D structures like ears and pyramid shapes with more than 2 cm of height are 3D printed using the optimized composition. All the synthesized hydrogels have shown nontoxicity and cell-supportiveness. Loading of cells, tetracycline, and bovine serum albumin into the hydrogel led to better bioink properties such as cell attachment, growth, and proliferation for osteoblast cells. The test results suggest that this hydrogel is biocompatible and has potential for 3D bioprinting of self-standing structures in bioink form in tissue engineering and regenerative medicine.

Schlagwörter

Stichwörter der Autor:innen

2-hydroxyethyl acrylate3D bioprintingcysteaminehyaluronic acid hydrogelself-healing

Autor:innen und Institutionen

  • Department of Chemical and Biomolecular Engineering, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea.
  • Convergence Institute of Biomedical Engineering and Biomaterials, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea.
  • Medical Electronics Research Center, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea.

ORCID-Profile: Amitava Bhattacharyya, Insup Noh

Förderung

  • Seoul National University of Science and Technology, Republic of Korea

Zitieren

APA

Nagaraja, K., Bhattacharyya, A., Jung, M., Kim, D., Khatun, M. R., & Noh, I. (2024). 3D Bioprintable Self-Healing Hyaluronic Acid Hydrogel with Cysteamine Grafting for Tissue Engineering. Gels, 10(12), 780. https://doi.org/10.3390/gels10120780

Vancouver

Nagaraja K, Bhattacharyya A, Jung M, Kim D, Khatun MR, Noh I. 3D Bioprintable Self-Healing Hyaluronic Acid Hydrogel with Cysteamine Grafting for Tissue Engineering. Gels. 2024;10(12):780. doi:10.3390/gels10120780

BibTeX
@article{Nagaraja2024,
  author = {Nagaraja, Kasula and Bhattacharyya, Amitava and Jung, Minsik and Kim, Dajeong and Khatun, Mst Rita and Noh, Insup},
  title = {3D Bioprintable Self-Healing Hyaluronic Acid Hydrogel with Cysteamine Grafting for Tissue Engineering},
  journal = {Gels},
  year = {2024},
  volume = {10},
  number = {12},
  pages = {780},
  doi = {10.3390/gels10120780}
}
Kostenlos starten →