EUVIMEDEUVIMED entdecken
Crossref

3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering

Subhashini Ravi iD, L P Pavithra Chokkakula, Pravin Shankar Giri, Gayathri Korra, Suhash Ranjan Dey iD, Subha Narayan Rath

ACS Applied Materials & Interfaces · 26.04.2023 · 15 (16) · 19921-19936

DOI: 10.1021/acsami.3c00389 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 14.04.2023. Verfasst von Subhashini Ravi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Regenerative Medicine and Stem cell Laboratory (RMS), Department of Biomedical Engineering, Indian Institute of Technology Hyderabad, Kandi 502284, T…. Hauptthemen laut MEDLINE: Cartilage, Articular, Bioprinting. Die Arbeit wurde bisher 51-mal zitiert (Crossref) und nennt 69 Literaturangaben. Gefördert von: Indian Council of Medical Research, Council??of??Scientific and Industrial Research, India, Indian Institute of Technology Hyderabad.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As hypoxia plays a significant role in the formation and maintenance of cartilage tissue, aiming to develop native hypoxia-mimicking tissue engineering scaffolds is an efficient method to treat articular cartilage (AC) defects. Cobalt (Co) is documented for its hypoxic-inducing effects in vitro by stabilizing the hypoxia-inducible factor-1α (HIF-1α), a chief regulator of stem cell fate. Considering this, we developed a novel three-dimensional (3D) bioprintable hypoxia-mimicking nano bioink wherein cobalt nanowires (Co NWs) were incorporated into the poly(ethylene glycol) diacrylate (PEGDA) hydrogel system as a hypoxia-inducing agent and encapsulated with umbilical cord-derived mesenchymal stem cells (UMSCs). In the current study, we investigated the impact of Co NWs on the chondrogenic differentiation of UMSCs in the PEGDA hydrogel system. Herein, the hypoxia-mimicking nano bioink (PEGDA+Co NW) was rheologically optimized to bioprint geometrically stable cartilaginous constructs. The bioprinted 3D constructs were evaluated for their physicochemical characterization, swelling-degradation behavior, mechanical properties, cell proliferation, and the expression of chondrogenic markers by histological, immunofluorescence, and reverse transcription-quantitative polymerase chain reaction (RT-qPCR) methods. The results disclosed that, compared to the control (PEGDA) group, the hypoxia-mimicking nano bioink (PEGDA+Co NW) group outperformed in print fidelity and mechanical properties. Furthermore, live/dead staining, double-stranded DNA (dsDNA) content, and glycosaminoglycans (GAGs) content demonstrated that adding low amounts of Co NWs (

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Cartilage, ArticularBioprintingHumansTissue EngineeringTissue ScaffoldsHydrogelsHypoxiaCobaltPrinting, Three-DimensionalPolyethylene Glycols

Stichwörter der Autor:innen

3D bioprintingcartilage tissue engineeringcobalt nanowireshypoxia-mimickingnano bioink

Substanzen

HydrogelsCobaltpoly(ethylene glycol)diacrylatePolyethylene Glycols

Autor:innen und Institutionen

  • Regenerative Medicine and Stem cell Laboratory (RMS), Department of Biomedical Engineering, Indian Institute of Technology Hyderabad, Kandi 502284, Telangana, India.
  • Department of Materials Science and Metallurgical Engineering, Indian Institute of Technology Hyderabad, Kandi 502284, Telangana, India.
  • Department of Obstetrics and Gynecology, Sri Manjeera Super Specialty Hospital, Sangareddy 502001, Medak, Telangana, India.

ORCID-Profile: Subhashini Ravi, Suhash Ranjan Dey

Förderung

  • Indian Council of Medical Research
  • Council??of??Scientific and Industrial Research, India
  • Indian Institute of Technology Hyderabad

Zitieren

APA

Ravi, S., Chokkakula, L. P. P., Giri, P. S., Korra, G., Dey, S. R., & Rath, S. N. (2023). 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering. ACS Applied Materials & Interfaces, 15(16), 19921-19936. https://doi.org/10.1021/acsami.3c00389

Vancouver

Ravi S, Chokkakula LPP, Giri PS, Korra G, Dey SR, Rath SN. 3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering. ACS Applied Materials & Interfaces. 2023;15(16):19921-19936. doi:10.1021/acsami.3c00389

BibTeX
@article{Ravi2023,
  author = {Ravi, Subhashini and Chokkakula, L P Pavithra and Giri, Pravin Shankar and Korra, Gayathri and Dey, Suhash Ranjan and Rath, Subha Narayan},
  title = {3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {16},
  pages = {19921--19936},
  doi = {10.1021/acsami.3c00389}
}
Kostenlos starten →