EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Process Mapping of the Sol–Gel Transition in Acid-Initiated Sodium Silicate Solutions

Marzieh Matinfar, John A Nychka iD

Gels · 21.10.2024 · 10 (10) · 673

DOI: 10.3390/gels10100673 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 21.10.2024. Verfasst von Marzieh Matinfar und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Materials Engineering, University of Alberta, Edmonton, AB T6G 1H9, Canada. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council, The Natural Sciences and Engineering Research Council of Canada (NSERC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fabricating large-scale porous bioactive glass bone scaffolds presents significant challenges. This study aims to develop formable, in situ setting scaffolds with a practical gelation time of about 10 min by mixing 45S5 bioactive glass with sodium silicate (waterglass) and an acid initiator. The effects of pH (2–11), waterglass concentration (15–50 wt.%), and acid initiator type (phosphoric or boric acid) were examined to optimize gelation kinetics and microstructure. A 10 min gelation time was achieved with boric acid and phosphoric acid at various pH levels by adjusting the waterglass concentration. Exponential and polynomial models were proposed to predict gelation times in basic and acidic environments, respectively. The optical properties of the gels were studied qualitatively and quantitatively, providing insights into gelation kinetics and structure. Acidic gels formed smaller particles in a dense network (pores < 550 nm) with higher light transmittance, while basic gels had larger aggregates (pores ~5 µm) and lower transmittance. As the waterglass concentration decreased, pore size and transmittance converged in both groups. The onset of gelation was detected around 8 min using the derivative of light transmittance. This work identifies the key factors controlling waterglass gelation and their impact on gel structure, enabling the tailored creation of formable, in situ setting bioactive glass bone scaffolds.

Schlagwörter

Stichwörter der Autor:innen

bone tissue scaffoldcolloidal silicagelation kineticsoptical propertiessilica gelsodium silicate solutionsol–gel

Autor:innen und Institutionen

  • Department of Chemical and Materials Engineering, University of Alberta, Edmonton, AB T6G 1H9, Canada.

ORCID-Profile: John A Nychka

Förderung

  • Natural Sciences and Engineering Research Council
  • The Natural Sciences and Engineering Research Council of Canada (NSERC)

Zitieren

APA

Matinfar, M., & Nychka, J. A. (2024). Process Mapping of the Sol–Gel Transition in Acid-Initiated Sodium Silicate Solutions. Gels, 10(10), 673. https://doi.org/10.3390/gels10100673

Vancouver

Matinfar M, Nychka JA. Process Mapping of the Sol–Gel Transition in Acid-Initiated Sodium Silicate Solutions. Gels. 2024;10(10):673. doi:10.3390/gels10100673

BibTeX
@article{Matinfar2024,
  author = {Matinfar, Marzieh and Nychka, John A},
  title = {Process Mapping of the Sol–Gel Transition in Acid-Initiated Sodium Silicate Solutions},
  journal = {Gels},
  year = {2024},
  volume = {10},
  number = {10},
  pages = {673},
  doi = {10.3390/gels10100673}
}
Kostenlos starten →