Amorphous to Crystalline Transition in Nanoimprinted Sol–Gel Titanium Oxide Metasurfaces
Advanced Materials · 2024-12 · 36 (49)
DOI: 10.1002/adma.202405378 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 14.10.2024. Verfasst von Joohoon Kim und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea. Die Arbeit wurde bisher 42-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: POSCO-POSTECH-RIST Convergence Research Center program, National Research Foundation of Korea, Korean Presidential Science fellowship.
Abstract (Originalsprache)
Crystalline titanium dioxide (TiO 2 ) (anatase and rutile) possesses a higher refractive index than amorphous TiO 2 and near‐zero absorption in the visible region, making them an ideal material for visible metasurfaces. However, fabrication limitations hinder their implementation into flat optics. In this work, a wafer‐scale manufacturing platform is proposed for crystalline TiO 2 metasurfaces. Sol–gel TiO 2 is developed as a printable material in which its material phase can be precisely controlled to produce amorphous, anatase, or rutile, depending on the crystallization temperature. Therefore, anatase or rutile metalenses can be fabricated on a wafer scale using thermal nanoimprint lithography and sintering process. The high refractive index of the crystalline TiO 2 contributes to the enhanced conversion efficiency of the fabricated metalenses. The fabricated metalenses exhibit diffraction‐limited focusing and imaging capabilities, comparable to the theoretically ideal lenses.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea.
- Department of Materials Science and Engineering, Korea University, Seoul, 02841, Republic of Korea.
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea.
- Department of Electrical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea.
- POSCO-POSTECH-RIST Convergence Research Center for Flat Optics and Metaphotonics, Pohang, 37673, Republic of Korea.
- National Institute of Nanomaterials Technology (NINT), Pohang, 37673, Republic of Korea.
ORCID-Profile: Joohoon Kim, Junsuk Rho
Förderung
- POSCO-POSTECH-RIST Convergence Research Center program
- National Research Foundation of Korea
- Korean Presidential Science fellowship
- Asan Foundation Biomedical Science fellowship
- NRF M.S. fellowship
- SBS Foundation fellowship
Zitieren
APA
Kim, J., Kim, W., Choi, M., Park, Y., Kang, D., Lee, E., Park, C., Sung, H., Lee, H., & Rho, J. (2024). Amorphous to Crystalline Transition in Nanoimprinted Sol–Gel Titanium Oxide Metasurfaces. Advanced Materials, 36(49). https://doi.org/10.1002/adma.202405378
Vancouver
Kim J, Kim W, Choi M, Park Y, Kang D, Lee E, et al. Amorphous to Crystalline Transition in Nanoimprinted Sol–Gel Titanium Oxide Metasurfaces. Advanced Materials. 2024;36(49). doi:10.1002/adma.202405378
BibTeX
@article{Kim2024,
author = {Kim, Joohoon and Kim, Wonjoong and Choi, Minseok and Park, Yujin and Kang, Dohyun and Lee, Eunji and Park, Chanwoong and Sung, Hansang and Lee, Heon and Rho, Junsuk},
title = {Amorphous to Crystalline Transition in Nanoimprinted Sol–Gel Titanium Oxide Metasurfaces},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {49},
doi = {10.1002/adma.202405378}
}
EUVIMED