Study on a Strong Polymer Gel by the Addition of Micron Graphite Oxide Powder and Its Plugging of Fracture
Gels · 30.04.2024 · 10 (5) · 304
DOI: 10.3390/gels10050304 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gels, online erschienen am 30.04.2024. Verfasst von Bin Shi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Hubei Key Laboratory of Drilling and Production Engineering for Oil and Gas, School of Petroleum Engineering, Yangtze University, Wuhan 430100, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, the Innovation Capacity Support Program of Shaanxi.
Abstract (Originalsprache)
It is difficult to plug the fracture water channeling of a fractured low-permeability reservoir during water flooding by using the conventional acrylamide polymer gel due to its weak mechanical properties. For this problem, micron graphite powder is added to enhance the comprehensive properties of the acrylamide polymer gel, which can improve the plugging effect of fracture water channeling. The chemical principle of this process is that the hydroxyl and carboxyl groups of the layered micron graphite powder can undergo physicochemical interactions with the amide groups of the polyacrylamide molecule chain. As a rigid structure, the graphite powder can support the flexible skeleton of the original polyacrylamide molecule chain. Through the synergy of the rigid and flexible structures, the viscoelasticity, thermal stability, tensile performance, and plugging ability of the new-type gel can be significantly enhanced. Compared with a single acrylamide gel, after adding 3000 mg/L of micrometer-sized graphite powder, the elastic modulus, the viscous modulus, the phase transition temperature, the breakthrough pressure gradient, the elongation at break, and the tensile stress of the acrylamide gel are all greatly improved. After adding the graphite powder to the polyacrylamide gel, the fracture water channeling can be effectively plugged. The characteristics of the networked water flow channel are obvious during the injected water break through the gel in the fracture. The breakthrough pressure of water flooding is high. The experimental results are an attempt to develop a new gel material for the water plugging of a fractured low-permeability reservoir.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Hubei Key Laboratory of Drilling and Production Engineering for Oil and Gas, School of Petroleum Engineering, Yangtze University, Wuhan 430100, China.
- Research Institute of Shaanxi Yanchang Petroleum (Group) Co., Ltd., Xi'an 710075, China.
- Hubei Provincial Key Laboratory of Oil and Gas Exploration and Development Theory and Technology, Department of Petroleum Engineering, China University of Geosciences (Wuhan), Wuhan 430074, China.
- College of Chemistry and Chemical Engineering, Xi'an University of Petroleum, Xi'an 710065, China.
ORCID-Profile: Lei Zhang
Förderung
- the National Natural Science Foundation of China
- the Innovation Capacity Support Program of Shaanxi
Zitieren
APA
Shi, B., Zhang, G., Zhang, L., Wang, C., Li, Z., & Chen, F. (2024). Study on a Strong Polymer Gel by the Addition of Micron Graphite Oxide Powder and Its Plugging of Fracture. Gels, 10(5), 304. https://doi.org/10.3390/gels10050304
Vancouver
Shi B, Zhang G, Zhang L, Wang C, Li Z, Chen F. Study on a Strong Polymer Gel by the Addition of Micron Graphite Oxide Powder and Its Plugging of Fracture. Gels. 2024;10(5):304. doi:10.3390/gels10050304
BibTeX
@article{Shi2024,
author = {Shi, Bin and Zhang, Guangming and Zhang, Lei and Wang, Chengjun and Li, Zhonghui and Chen, Fangping},
title = {Study on a Strong Polymer Gel by the Addition of Micron Graphite Oxide Powder and Its Plugging of Fracture},
journal = {Gels},
year = {2024},
volume = {10},
number = {5},
pages = {304},
doi = {10.3390/gels10050304}
}
EUVIMED