Experimental Investigation of Ethanol Injection Pressure and Ignition Timing Effects on an Ethanol/Hydrogen Dual Direct-Injection SI Engine
Fuels · 20.11.2026 · 7 (4) · 89
DOI: 10.3390/fuels7040089 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fuels, online erschienen am 20.11.2026. Verfasst von Jayashish Kumar Pandey und 4 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The demand for carbon-free energy sources has increased the use of ethanol and hydrogen fuels in spark-ignition engines. The combustion process of these fuels relies heavily on the fuel injection and ignition techniques. In the present study, the effect of the combination of ethanol injection pressure and ignition timing (IT) on the performance of a hydrogen-assisted ethanol dual direct-injection engine is examined. A series of experiments were performed on a 0.5 L single-cylinder engine for ethanol injection pressures of 100 to 200 bar and ITs between 14° before top dead center (bTDC) and top dead center (TDC). The engine’s performance, combustion process, emissions, energy distribution, cyclic variation, in-cylinder pressure, and heat release characteristics were analyzed. Brake-specific fuel consumption (BSFC) of 0.349 kg/kWh occurred at 4° bTDC, and 200 bar was the minimum, while a maximum mean effective pressure (IMEP) of 15.297 bar was recorded at 14° bTDC and 200 bar; the coefficient of variation of IMEP (CoVIMEP) varied between 2.012% and 2.725%, which shows that the combustion was stable. The maximum pressure and heat-release rate of the in-cylinder pressure were 39.902 bar and 42.474 J/°C, respectively. The lowest CO and HC emissions were 0.084 g/kWh and 0.847 g/kWh, respectively. The increased injection pressure improved fuel–air mixing and shortened the combustion duration, but only to a minor extent at excessively high injection pressures. The overall working window for the ethanol injection pressure and IT of 160 to 200 bar and 10 to 4° bTDC, respectively, was found to be sufficient to maintain fuel economy, combustion stability, useful work, and carbonaceous emissions.
Zitieren
APA
Pandey, J. K., Radhakrishnan, J., B, S. B., Varghese, G., & Kottayat, N. (2026). Experimental Investigation of Ethanol Injection Pressure and Ignition Timing Effects on an Ethanol/Hydrogen Dual Direct-Injection SI Engine. Fuels, 7(4), 89. https://doi.org/10.3390/fuels7040089
Vancouver
Pandey JK, Radhakrishnan J, B SB, Varghese G, Kottayat N. Experimental Investigation of Ethanol Injection Pressure and Ignition Timing Effects on an Ethanol/Hydrogen Dual Direct-Injection SI Engine. Fuels. 2026;7(4):89. doi:10.3390/fuels7040089
BibTeX
@article{Pandey2026,
author = {Pandey, Jayashish Kumar and Radhakrishnan, Jayakrishnan and B, Sandesh Bhaktha and Varghese, George and Kottayat, Nidhul},
title = {Experimental Investigation of Ethanol Injection Pressure and Ignition Timing Effects on an Ethanol/Hydrogen Dual Direct-Injection SI Engine},
journal = {Fuels},
year = {2026},
volume = {7},
number = {4},
pages = {89},
doi = {10.3390/fuels7040089}
}
EUVIMED