EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biochar Surface Chemistry Modification by Blending Hardwood, Softwood, and Refuse-Derived Fuel: Insights from XPS, FTIR, and Zeta Potential Analysis

Paul C. Ani, Hasan J. Al-Abedi, Joseph D. Smith, Zeyad Zeitoun

Fuels · 22.09.2025 · 6 (3) · 71

DOI: 10.3390/fuels6030071 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fuels, online erschienen am 22.09.2025. Verfasst von Paul C. Ani und 3 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Syntech Graphene Technologies, LLC..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates how the inclusion of refuse-derived fuel (RDF) alters the surface chemistry and electrostatic behavior of oak-based biochar. Biochars were produced using downdraft gasification at 850 °C from 100% oak (HW) and a ternary blend comprising 50% oak, 30% pine, and 20% RDF (HW/SW/RDF). Characterization using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), zeta potential, pH, and electrophoretic mobility was conducted to assess surface functionality and colloidal behavior. The RDF-containing biochar exhibited a 43.3% increase in surface nitrogen content (from 0.24% to 0.90%) and a 6.6% rise in calcium content (from 2.07% to 2.27%) alongside the introduction of chlorine (0.20%) and elevated silicon levels (0.69%) compared to RDF-free counterparts. A concurrent reduction in oxygen-containing functional groups was observed, as O1s decreased from 15.75% in HW to 13.37% in HW/SW/RDF. Electrokinetic measurements revealed a notable decrease in zeta potential magnitude from −31.5 mV in HW to −24.2 mV in HW/SW/RDF, indicating diminished surface charge and colloidal stability. Moreover, the pH declined from 10.25 to 7.76, suggesting a loss of alkalinity and buffering capacity. These compositional and electrostatic shifts demonstrate that RDF inclusion significantly modifies the surface reactivity of biochar, influencing its performance in catalysis, ion exchange, and nutrient retention. The findings underscore the need for tailored post-treatment strategies to enhance the functionality of RDF-modified biochars in environmental applications.

Förderung

  • Syntech Graphene Technologies, LLC.

Zitieren

APA

Ani, P. C., Al-Abedi, H. J., Smith, J. D., & Zeitoun, Z. (2025). Biochar Surface Chemistry Modification by Blending Hardwood, Softwood, and Refuse-Derived Fuel: Insights from XPS, FTIR, and Zeta Potential Analysis. Fuels, 6(3), 71. https://doi.org/10.3390/fuels6030071

Vancouver

Ani PC, Al-Abedi HJ, Smith JD, Zeitoun Z. Biochar Surface Chemistry Modification by Blending Hardwood, Softwood, and Refuse-Derived Fuel: Insights from XPS, FTIR, and Zeta Potential Analysis. Fuels. 2025;6(3):71. doi:10.3390/fuels6030071

BibTeX
@article{Ani2025,
  author = {Ani, Paul C. and Al-Abedi, Hasan J. and Smith, Joseph D. and Zeitoun, Zeyad},
  title = {Biochar Surface Chemistry Modification by Blending Hardwood, Softwood, and Refuse-Derived Fuel: Insights from XPS, FTIR, and Zeta Potential Analysis},
  journal = {Fuels},
  year = {2025},
  volume = {6},
  number = {3},
  pages = {71},
  doi = {10.3390/fuels6030071}
}
Kostenlos starten →