EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modification of the Aeration-Supplied Configuration in the Biodrying Process for Refuse-Derived Fuel (RDF) Production

Abhisit Bhatsada, Suthum Patumsawad, Sirintornthep Towprayoon, Chart Chiemchaisri, Awassada Phongphiphat, Komsilp Wangyao

Energies · 04.04.2023 · 16 (7) · 3235

DOI: 10.3390/en16073235 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 04.04.2023. Verfasst von Abhisit Bhatsada und 5 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Council of Thailand (NRCT), SCI Eco Services Co., Ltd., Joint Graduate School of Energy and Environment (JGSEE), King Mongkut’s University of Technology Thonburi.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biodrying is an essential part of the mechanical–biological treatment process that minimizes moisture content and simultaneously maximizes heating value for refuse-derived fuel (RDF) production. Although the mechanical separation process operates effectively in Thailand’s RDF production, high organic content levels and their degradation cause moisture contamination in RDF, producing wet RDF. Aeration is essential for an effective biodrying process, and can reduce RDF’s moisture content as well as increase its heating value. To maximize the biodrying effect, aeration should be optimized based on the waste conditions. This study proposes a modified aeration-supplied configuration for wet RDF biodrying. The aeration rate was modified based on the period within the biodrying operation; the first period is from the beginning until day 2.5, and the second period is from day 2.5 to day 5. The optimal aeration supply configuration was 0.5 m3/kg/day in the first period and then 0.3 m3/kg/day until the end of the process; this configuration yielded the greatest moisture content decrease of 35% and increased the low heating value of the biodried product by 11%. The final moisture content and low heating value were 24.07% and 4787 kcal/kg, respectively. Therefore, this optimal aeration-supplied configuration could be applied to meet the moisture content and low heating value requirements of the RDF production standard for Thailand’s local cement industry.

Förderung

  • National Research Council of Thailand (NRCT)
  • SCI Eco Services Co., Ltd.
  • Joint Graduate School of Energy and Environment (JGSEE), King Mongkut’s University of Technology Thonburi
  • Center of Excellence on Energy Technology and Environment (CEE), the Ministry of Higher Education, Science, Research and Innovation (MHESI)

Zitieren

APA

Bhatsada, A., Patumsawad, S., Towprayoon, S., Chiemchaisri, C., Phongphiphat, A., & Wangyao, K. (2023). Modification of the Aeration-Supplied Configuration in the Biodrying Process for Refuse-Derived Fuel (RDF) Production. Energies, 16(7), 3235. https://doi.org/10.3390/en16073235

Vancouver

Bhatsada A, Patumsawad S, Towprayoon S, Chiemchaisri C, Phongphiphat A, Wangyao K. Modification of the Aeration-Supplied Configuration in the Biodrying Process for Refuse-Derived Fuel (RDF) Production. Energies. 2023;16(7):3235. doi:10.3390/en16073235

BibTeX
@article{Bhatsada2023,
  author = {Bhatsada, Abhisit and Patumsawad, Suthum and Towprayoon, Sirintornthep and Chiemchaisri, Chart and Phongphiphat, Awassada and Wangyao, Komsilp},
  title = {Modification of the Aeration-Supplied Configuration in the Biodrying Process for Refuse-Derived Fuel (RDF) Production},
  journal = {Energies},
  year = {2023},
  volume = {16},
  number = {7},
  pages = {3235},
  doi = {10.3390/en16073235}
}
Kostenlos starten →