Investigation on Flexural Behavior of Galvanized Cold-Formed Steel Beams Exposed to Fire with Different Stiffener Configurations
Fire · 13.09.2024 · 7 (9) · 318
DOI: 10.3390/fire7090318 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fire, online erschienen am 13.09.2024. Verfasst von Varun Sabu Sam und 5 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Cold-formed steel (CFS) sections, increasingly favored in the construction industry due to their numerous advantages over hot-rolled steel, have received limited attention in research concerning the flexural behavior of galvanized iron (GI)-based CFS at elevated temperatures. Understanding how these materials and structures behave under elevated temperatures is crucial for fire safety. The authors have performed experimental studies previously on GI-based CFS under elevated temperatures. In that study, CFS sections made of GI of grade E350 of 1.5 m long and 2 mm thickness were used. Built-up beam sections were tested under two-point loading after heating to 60 and 90 min durations and subsequently cooling them down using air and water. This study aims to uncover the influence of different stiffener configurations on the load carrying capacity of sections under elevated temperature parametrically. With the experimental study results from previous studies as a reference, authors used FEM analysis to comprehensively study the behavior of GI-based CFS sections under fire. Vertical, horizontal, and not providing a stiffener were the configurations selected to study the beams parametrically. Parametric analysis confirmed that different stiffener configurations did not alter the predominant failure mode, which remained distortional buckling across all specimens. Beams with vertical stiffeners demonstrated superior performance compared to those with horizontal stiffeners in parametric analysis. Lateral–torsional buckling was observed in the reference specimen, lacking stiffeners due to inadequate restraint at the supports.
Zitieren
APA
Sam, V. S., Marak, G. W. K., Nammalvar, A., Andrushia, D., Gurupatham, B. G. A., & Roy, K. (2024). Investigation on Flexural Behavior of Galvanized Cold-Formed Steel Beams Exposed to Fire with Different Stiffener Configurations. Fire, 7(9), 318. https://doi.org/10.3390/fire7090318
Vancouver
Sam VS, Marak GWK, Nammalvar A, Andrushia D, Gurupatham BGA, Roy K. Investigation on Flexural Behavior of Galvanized Cold-Formed Steel Beams Exposed to Fire with Different Stiffener Configurations. Fire. 2024;7(9):318. doi:10.3390/fire7090318
BibTeX
@article{Sam2024,
author = {Sam, Varun Sabu and Marak, Garry Wegara K and Nammalvar, Anand and Andrushia, Diana and Gurupatham, Beulah Gnana Ananthi and Roy, Krishanu},
title = {Investigation on Flexural Behavior of Galvanized Cold-Formed Steel Beams Exposed to Fire with Different Stiffener Configurations},
journal = {Fire},
year = {2024},
volume = {7},
number = {9},
pages = {318},
doi = {10.3390/fire7090318}
}
EUVIMED