Experimental Investigation of the Influence of Metallic Coatings on Yarn Pull-Out Behavior in Kevlar® Fabrics
Fibers · 11.01.2023 · 11 (1) · 7
DOI: 10.3390/fib11010007 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fibers, online erschienen am 11.01.2023. Verfasst von Julie Roark und 8 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: US Army Contracting Command-APG, Natick Contracting Division, Natick, MA, Directed Vapor Technologies International, Inc..
Abstract (Originalsprache)
This work reports yarn pull-out studies of commercially available Kevlar® KM2+ individual yarns coated with metallic layers (copper, aluminum, aluminum nitride and silver) via a directed vapor deposition process. The uncoated control and metal-coated Kevlar® yarns are hand-woven into fabric swatches for quasi-static pull-out experiments. To perform these experiments, a yarn pull-out fixture is custom-designed and fabricated to apply transverse pre-tension to the fabric. Three levels of transverse pre-tensions are studied at 100 N, 200 N, and 400 N. The results showed that both peak pull-out force and energy absorption during the pull-out process increase with increase in transverse pre-tension. All the metal-coated groups showed an approximately 200% increase in peak pull-out force and a 20% reduction in tenacity compared to uncoated control. Furthermore, all the metal-coated groups showed an increase in energy absorption, with aluminum-coated yarns showing the highest increase of 230% compared to control. These results suggest enhanced frictional interactions during yarn pull-out in metal-coated yarns compared to uncoated control as evidenced by the surface roughness profile of individual fibers and inter-yarn frictional calculations.
Förderung
- US Army Contracting Command-APG, Natick Contracting Division, Natick, MA
- Directed Vapor Technologies International, Inc.
Zitieren
APA
Roark, J., Thomas, F. D., Sockalingam, S., Kempf, J., Christy, D., Haas, D., O’Brien, D. J., Senecal, K. J., & Crittenden, S. R. (2023). Experimental Investigation of the Influence of Metallic Coatings on Yarn Pull-Out Behavior in Kevlar® Fabrics. Fibers, 11(1), 7. https://doi.org/10.3390/fib11010007
Vancouver
Roark J, Thomas FD, Sockalingam S, Kempf J, Christy D, Haas D, et al. Experimental Investigation of the Influence of Metallic Coatings on Yarn Pull-Out Behavior in Kevlar® Fabrics. Fibers. 2023;11(1):7. doi:10.3390/fib11010007
BibTeX
@article{Roark2023,
author = {Roark, Julie and Thomas, Frank D. and Sockalingam, Subramani and Kempf, Julia and Christy, Dan and Haas, Derek and O’Brien, Daniel J. and Senecal, Kris J. and Crittenden, Scott R.},
title = {Experimental Investigation of the Influence of Metallic Coatings on Yarn Pull-Out Behavior in Kevlar® Fabrics},
journal = {Fibers},
year = {2023},
volume = {11},
number = {1},
pages = {7},
doi = {10.3390/fib11010007}
}
EUVIMED