EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Molding Process Parameters of Caragana korshinskii Kom. Based on Box-Behnken Design

Yuyao Xu, Junyan Huang, Jue Wang, Guosheng Yu, Xiaofeng Xu

Forests · 26.11.2024 · 15 (12) · 2086

DOI: 10.3390/f15122086 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Forests, online erschienen am 26.11.2024. Verfasst von Yuyao Xu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: national college students innovation and entrepreneurship training program, innovation training program of Zhejiang A&F University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, using the Box-Behnken design (BBD) experimental method, a plunger-type three-roller pelletizer was employed to explore the optimal pelletizing parameters for biomass fuel pellets with Caragana korshinskii Kom. strip as the raw material. The moisture content of the raw material, the length-to-diameter ratio of the forming die, and the rotational speed of the ring mold were identified as the experimental factors. The relaxation density of the biomass fuel (BMF) pellets and the productivity of the pelletizer were set as the experimental indicators. The study aimed to uncover the influence patterns of these factors on the pelletizing outcomes and establish regression equations between various factors and indicators. The results revealed that when Caragana korshinskii Kom. strip was used as the raw material in this pelletizer, the optimal pelletizing parameters were as follows: a moisture content of 15.5%, a forming die length-to-diameter ratio of 5.3, and a ring mold rotational speed of 30 rpm. Under these conditions, the relaxation density, mechanical durability, and productivity reached 1.139 g/cm3, 96.21%, and 6.278 t/h, respectively. The energy consumption per ton of pellets did not exceed 41.3 kWh. The significance of this study is its potential to expand the utilization range of Caragana korshinskii Kom., reduce environmental pollution at the same time, and make a certain contribution to carbon peak and carbon neutrality.

Förderung

  • national college students innovation and entrepreneurship training program
  • innovation training program of Zhejiang A&F University

Zitieren

APA

Xu, Y., Huang, J., Wang, J., Yu, G., & Xu, X. (2024). Optimization of Molding Process Parameters of Caragana korshinskii Kom. Based on Box-Behnken Design. Forests, 15(12), 2086. https://doi.org/10.3390/f15122086

Vancouver

Xu Y, Huang J, Wang J, Yu G, Xu X. Optimization of Molding Process Parameters of Caragana korshinskii Kom. Based on Box-Behnken Design. Forests. 2024;15(12):2086. doi:10.3390/f15122086

BibTeX
@article{Xu2024,
  author = {Xu, Yuyao and Huang, Junyan and Wang, Jue and Yu, Guosheng and Xu, Xiaofeng},
  title = {Optimization of Molding Process Parameters of Caragana korshinskii Kom. Based on Box-Behnken Design},
  journal = {Forests},
  year = {2024},
  volume = {15},
  number = {12},
  pages = {2086},
  doi = {10.3390/f15122086}
}
Kostenlos starten →