EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Discrete element modelling and mechanical properties and cutting experiments of Caragana korshinskii Kom. stems

Cao Qingqiu, Zhang Shengwei, Li Tao, Zhai Gaixia, Yuan Hongfang

Frontiers in Plant Science · 31.10.2024 · 15

DOI: 10.3389/fpls.2024.1457243 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Plant Science, online erschienen am 31.10.2024. Verfasst von Cao Qingqiu und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Biological and Agricultural Engineering, Jilin University, Changchun, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The forage crop Caragana korshinskii Kom. is of high quality, and the biomechanical properties of its plant system are of great significance for the development of harvesting equipment and the comprehensive utilisation of crop resources. However, the extant research on the biomechanical properties of Caragana korshinskii Kom. is inadequate to enhance and refine the theoretical techniques for mechanised harvesting. In this study, we established a discrete element model of CKS based on the Hertz-Mindlin bonding contact model. By combining physical experiments and numerical simulations, we calibrated and validated the intrinsic and contact parameters. The Plackett-Burman design test was employed to identify the significant factors influencing bending force, and the optimal parameter combination for these factors was determined through response surface analysis. When the shear stiffness per unit area was 3.56×10 9 Pa, the bonded disk scale was 0.93 mm, the normal stiffness per unit area was 9.68×10 9 Pa, the normal strength was 5.62×10 7 Pa, the shear strength was 4.27×10 7 Pa, the discrete element numerical simulation results for three-point bending, radial compression, axial tension, and shear fracture exhibited a maximum failure force error of 3.32%, 4.37%, 4.87% and 3.74% in comparison to the physical experiments. In the cutting experiments, a smaller radial angle between the tool edge and the stem resulted in less damage to the cutting section, which was beneficial for the smoothness of the stubble after harvesting and the subsequent growth of the stem. The discrepancy in cutting force between the physical and numerical simulations was 3.89%, and the F - x (force versus displacement) trend was consistent. The multi-angle experimental validation demonstrated that the discrete element model of CKS is an accurate representation of the real biomechanical properties of CKS. The findings offer valuable insights into the mechanisms underlying crop-machine interactions.

Schlagwörter

Stichwörter der Autor:innen

discrete element methodmechanical propertiesparameter calibrationstem cuttingstem of Caragana korshinskii Kom.

Autor:innen und Institutionen

  • College of Biological and Agricultural Engineering, Jilin University, Changchun, China.
  • Research Center, Hohhot Branch of Chinese Academy of Agricultural Mechanization Sciences, Hohhot, China.

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Qingqiu, C., Shengwei, Z., Tao, L., Gaixia, Z., & Hongfang, Y. (2024). Discrete element modelling and mechanical properties and cutting experiments of Caragana korshinskii Kom. stems. Frontiers in Plant Science, 15. https://doi.org/10.3389/fpls.2024.1457243

Vancouver

Qingqiu C, Shengwei Z, Tao L, Gaixia Z, Hongfang Y. Discrete element modelling and mechanical properties and cutting experiments of Caragana korshinskii Kom. stems. Frontiers in Plant Science. 2024;15. doi:10.3389/fpls.2024.1457243

BibTeX
@article{Qingqiu2024,
  author = {Qingqiu, Cao and Shengwei, Zhang and Tao, Li and Gaixia, Zhai and Hongfang, Yuan},
  title = {Discrete element modelling and mechanical properties and cutting experiments of Caragana korshinskii Kom. stems},
  journal = {Frontiers in Plant Science},
  year = {2024},
  volume = {15},
  doi = {10.3389/fpls.2024.1457243}
}
Kostenlos starten →