EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Modeling Based on Finite Element Analysis of 3D-Printed Wood-Polylactic Acid Composites: A Comparison with Experimental Data

Ismail Ezzaraa, Nadir Ayrilmis, Mohamed Abouelmajd, Manja Kitek Kuzman, Ahmed Bahlaoui, Ismail Arroub, Jamaa Bengourram, Manuel Lagache, Soufiane Belhouideg

Forests · 04.01.2023 · 14 (1) · 95

DOI: 10.3390/f14010095 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Forests, online erschienen am 04.01.2023. Verfasst von Ismail Ezzaraa und 8 weiteren Autor:innen. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: STSM COST FP1407.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wood-polymer composites are increasingly produced through fused deposition modeling (FDM)—an additive manufacturing technique. The versatility of this technology has attracted several industries to print complex shapes and structures. This underscores the importance of studying the mechanical properties of the FDM parts, specifically, their elastic properties. A numerical homogenization methodology is introduced in the present study, focusing on the fundamental aspect of the elastic properties. Investigations were carried out on the influence of various parameters like wood volume fraction, aspect ratio, and internal porosity. The numerical results were validated using analytical models and experimental data. The comparison showed a satisfactory agreement with experimental data, where the relative error did not exceed 10%, leading to a strong conclusion about the validity and effectiveness of the proposed approach.

Förderung

  • STSM COST FP1407

Zitieren

APA

Ezzaraa, I., Ayrilmis, N., Abouelmajd, M., Kuzman, M. K., Bahlaoui, A., Arroub, I., Bengourram, J., Lagache, M., & Belhouideg, S. (2023). Numerical Modeling Based on Finite Element Analysis of 3D-Printed Wood-Polylactic Acid Composites: A Comparison with Experimental Data. Forests, 14(1), 95. https://doi.org/10.3390/f14010095

Vancouver

Ezzaraa I, Ayrilmis N, Abouelmajd M, Kuzman MK, Bahlaoui A, Arroub I, et al. Numerical Modeling Based on Finite Element Analysis of 3D-Printed Wood-Polylactic Acid Composites: A Comparison with Experimental Data. Forests. 2023;14(1):95. doi:10.3390/f14010095

BibTeX
@article{Ezzaraa2023,
  author = {Ezzaraa, Ismail and Ayrilmis, Nadir and Abouelmajd, Mohamed and Kuzman, Manja Kitek and Bahlaoui, Ahmed and Arroub, Ismail and Bengourram, Jamaa and Lagache, Manuel and Belhouideg, Soufiane},
  title = {Numerical Modeling Based on Finite Element Analysis of 3D-Printed Wood-Polylactic Acid Composites: A Comparison with Experimental Data},
  journal = {Forests},
  year = {2023},
  volume = {14},
  number = {1},
  pages = {95},
  doi = {10.3390/f14010095}
}
Kostenlos starten →