EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Pyrolysis Parameters by Design of Experiment for the Production of Biochar from Sewage Sludge

Giacomo Cedrone, Maria Paola Bracciale, Lorenzo Cafiero, Michela Langone, Davide Mattioli, Marco Scarsella, Riccardo Tuffi

Environments · 24.09.2024 · 11 (10) · 210

DOI: 10.3390/environments11100210 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environments, online erschienen am 24.09.2024. Verfasst von Giacomo Cedrone und 6 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Italian Ministry of Economic Development.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sewage sludge management is a key concern in today’s world. Improper disposal can lead to various environmental issues including air, water and soil pollution. Among the available technologies, thermal treatments, particularly pyrolysis, are gaining interest for their ability to reduce sewage sludge volume and to recover materials and energy from it. This study explored the influence of some relevant parameters in the thermal pyrolysis process. The design of experiment, named central composite design, was accounted to optimize temperature, heating rate and residence time in order to maximize the biochar yield and its CO2 adsorption capacity. A two-factor interaction model provided a satisfactory interpretation of the results. Within the studied ranges, maximum values of 47.8 wt% and 0.514 mol CO2/kg were obtained for the yield and CO2 adsorption capacity, respectively. Two significant experiments were repeated in a different pyrolysis system highlighting how other factors (e.g., reactor geometry, granulometry, etc.) can influence the quantity and the quality of produced biochar. The biochar obtained under the best pyrolysis conditions was characterized by a surface area of 124 m2/g and an ash content of 61 wt%. Lastly, the theoretical energy balance showed that the drying process is the main energy-intensive step in the pyrolysis of sewage sludge.

Förderung

  • Italian Ministry of Economic Development

Zitieren

APA

Cedrone, G., Bracciale, M. P., Cafiero, L., Langone, M., Mattioli, D., Scarsella, M., & Tuffi, R. (2024). Optimization of Pyrolysis Parameters by Design of Experiment for the Production of Biochar from Sewage Sludge. Environments, 11(10), 210. https://doi.org/10.3390/environments11100210

Vancouver

Cedrone G, Bracciale MP, Cafiero L, Langone M, Mattioli D, Scarsella M, et al. Optimization of Pyrolysis Parameters by Design of Experiment for the Production of Biochar from Sewage Sludge. Environments. 2024;11(10):210. doi:10.3390/environments11100210

BibTeX
@article{Cedrone2024,
  author = {Cedrone, Giacomo and Bracciale, Maria Paola and Cafiero, Lorenzo and Langone, Michela and Mattioli, Davide and Scarsella, Marco and Tuffi, Riccardo},
  title = {Optimization of Pyrolysis Parameters by Design of Experiment for the Production of Biochar from Sewage Sludge},
  journal = {Environments},
  year = {2024},
  volume = {11},
  number = {10},
  pages = {210},
  doi = {10.3390/environments11100210}
}
Kostenlos starten →