STUDYING THE PARAMETERS OF PELLET PRODUCTION FROM SEWAGE SLUDGE
Bulletin of the South Ural State University series "Power Engineering" · 2026 · 26 (1) · 92-100
DOI: 10.14529/power260111 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bulletin of the South Ural State University series "Power Engineering", 2026. Verfasst von A.P. Terekhin und 1 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Pelletizing is becoming a promising method for increasing the energy value of biomass and a key solution to the challenges of reducing the share of fossil fuel resources and increasing the value of waste in terms of its energy potential. This paper focuses on improving the efficiency of the energy use of waste, such as sewage sludge, within the pulp and paper production process. This study aims to select the optimal mode of pellet production from sewage sludge based on the Russian Standard R 55114–2012. Sewage sludge was granulated in an experimental pellet press used for pellet production from wood biomass. During pelletizing, various parameters were changed, including the rotation rate of the rollers on the matrix surface, the fit between the rollers and the matrix, and the rate of sediment supply to the matrix. The produced pellets meet the specifications outlined in R 5114–2012. The results of X-ray fluorescence analysis allowed determining the main components of the mineral part of the sewage sludge, the amount of basic and acidic oxides, as well as the content of carbon, hydrogen, and sulfur.
Zitieren
APA
Terekhin, A., & Maryandyshev, P. (2026). STUDYING THE PARAMETERS OF PELLET PRODUCTION FROM SEWAGE SLUDGE. Bulletin of the South Ural State University series "Power Engineering", 26(1), 92-100. https://doi.org/10.14529/power260111
Vancouver
Terekhin A, Maryandyshev P. STUDYING THE PARAMETERS OF PELLET PRODUCTION FROM SEWAGE SLUDGE. Bulletin of the South Ural State University series "Power Engineering". 2026;26(1):92-100. doi:10.14529/power260111
BibTeX
@article{Terekhin2026,
author = {Terekhin, A.P. and Maryandyshev, P.A.},
title = {STUDYING THE PARAMETERS OF PELLET PRODUCTION FROM SEWAGE SLUDGE},
journal = {Bulletin of the South Ural State University series "Power Engineering"},
year = {2026},
volume = {26},
number = {1},
pages = {92--100},
doi = {10.14529/power260111}
}
EUVIMED