Transient Thermo-Structural Response of Axial Bellows During Start-Up and Shutdown Cycles in Long-Distance Heating Pipelines
Eng · 23.06.2026 · 7 (7) · 305
DOI: 10.3390/eng7070305 ↗Kurz gefasst
Fachartikel in der Zeitschrift Eng, online erschienen am 23.06.2026. Verfasst von Jingkun Wang und 10 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science, Technology and Innovation Cooperation Study for the Heating Retrofit of China Resources Dengfeng Power Plant and Its New External Heat Network Project.
Abstract (Originalsprache)
This paper presents a comprehensive numerical investigation into the transient thermo-structural response of axial bellows during start-up and shutdown cycles in long-distance heating pipelines. Using ANSYS-based transient thermal–structural coupling finite element analysis under the pure linear elasticity and constant internal pressure, the spatio-temporal evolution mechanisms of temperature fields, axial deformation, and equivalent stress are systematically analyzed. The results demonstrate the highly synchronized evolution between temperature and deformation fields, with maximum axial deformation and equivalent stress consistently concentrated at the convolution root and transition arcs. Under steady-state high-temperature conditions (130 °C), the maximum equivalent stress reaches 332.78 MPa. However, after complete cooling and unloading, minimal residual deformation (≤0.001 mm) and residual stress (8.86 MPa) are observed, satisfying the pressure vessel shakedown criteria and confirming the inherent self-limiting nature of thermal secondary stresses. A specific decoupling phenomenon is revealed during the high-temperature steady-state holding period, where the deformation stabilizes while the stress undergoes secondary redistribution. The comparative analysis of different temperature change rates indicates that the fast start-up/shutdown (0.55 °C/s) induces severe transient temperature gradients, causing a nearly 50% increase in the maximum equivalent stress compared to the slow start-up/shutdown (0.275 °C/s). This study provides theoretical foundations for the service safety assessment of axial bellows and recommends gradual heating/cooling operation strategies (≤0.3 °C/s) to mitigate structural thermal shock risks.
Förderung
- National Natural Science Foundation of China
- Science, Technology and Innovation Cooperation Study for the Heating Retrofit of China Resources Dengfeng Power Plant and Its New External Heat Network Project
Zitieren
APA
Wang, J., Qin, S., Huang, J., Xu, K., Sun, Y., Jiang, C., Ye, Z., Zhang, Y., Zhang, M., Lu, K., & Hu, J. (2026). Transient Thermo-Structural Response of Axial Bellows During Start-Up and Shutdown Cycles in Long-Distance Heating Pipelines. Eng, 7(7), 305. https://doi.org/10.3390/eng7070305
Vancouver
Wang J, Qin S, Huang J, Xu K, Sun Y, Jiang C, et al. Transient Thermo-Structural Response of Axial Bellows During Start-Up and Shutdown Cycles in Long-Distance Heating Pipelines. Eng. 2026;7(7):305. doi:10.3390/eng7070305
BibTeX
@article{Wang2026,
author = {Wang, Jingkun and Qin, Shengwei and Huang, Jianli and Xu, Keqi and Sun, Yanqing and Jiang, Chuan and Ye, Zhenhuai and Zhang, Youtao and Zhang, Minxun and Lu, Kaihua and Hu, Junjie},
title = {Transient Thermo-Structural Response of Axial Bellows During Start-Up and Shutdown Cycles in Long-Distance Heating Pipelines},
journal = {Eng},
year = {2026},
volume = {7},
number = {7},
pages = {305},
doi = {10.3390/eng7070305}
}
EUVIMED