Integrated Thermo-Mechanical Analysis of a Turbopump Assembly Under Transient Start-Up Conditions
Energies · 06.11.2026 · 19 (21) · 5339
DOI: 10.3390/en19215339 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 06.11.2026. Verfasst von Muhammed Emin Polat und 4 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The reliability of turbopumps in satellite launch vehicles is critically dependent on their structural and thermal responses to severe gradients during the start-up sequence. The primary objective of this research is to perform a comprehensive virtual verification of a turbopump design by simulating these transient operational phases. To achieve this, a sequentially coupled computational framework is established. Initially, computational fluid dynamics and conjugate heat transfer analyses are conducted using fluid properties, turbopump geometry, and flow boundary conditions to extract transient aero/hydrodynamic loads, heat transfer coefficients, and reference temperatures. These thermal boundary conditions, coupled with temperature-dependent material properties, are mapped onto a transient thermal model. Subsequently, a discrete-time finite element analysis is employed to evaluate the temporal behaviour of thermo-mechanical stress states and multi-axis deformations across the assembly. By systematically integrating these analyses, this study quantifies the transient evolution of radial and axial clearances in the critical turbine stage to identify potential rotor–stator interference risks while accounting for conductive thermal coupling across the shaft and pump housings. Results indicate a significant transient reduction in clearance during the initial 12.9% of operation, driven by the differential thermal expansion between the rapidly heating rotor and the cooler stator due to its higher thermal inertia. However, the analysis confirms that a positive gap is consistently maintained even at maximum relative displacement, predicting no radial rotor–stator contact and ensuring the structural and aerodynamic integrity of the turbine stage. Ultimately, these findings provide essential design insights, demonstrating the necessity of holistic modeling in preventing transient failure modes and ensuring the operational safety of next-generation space propulsion systems without relying solely on costly hot-fire tests.
Zitieren
APA
Polat, M. E., Cadirci, S., Ozcelik, Y. E., Gorgulu, M. F., & Kayabasi, I. (2026). Integrated Thermo-Mechanical Analysis of a Turbopump Assembly Under Transient Start-Up Conditions. Energies, 19(21), 5339. https://doi.org/10.3390/en19215339
Vancouver
Polat ME, Cadirci S, Ozcelik YE, Gorgulu MF, Kayabasi I. Integrated Thermo-Mechanical Analysis of a Turbopump Assembly Under Transient Start-Up Conditions. Energies. 2026;19(21):5339. doi:10.3390/en19215339
BibTeX
@article{Polat2026,
author = {Polat, Muhammed Emin and Cadirci, Sertac and Ozcelik, Yunus Emre and Gorgulu, Mehmet Furkan and Kayabasi, Iskender},
title = {Integrated Thermo-Mechanical Analysis of a Turbopump Assembly Under Transient Start-Up Conditions},
journal = {Energies},
year = {2026},
volume = {19},
number = {21},
pages = {5339},
doi = {10.3390/en19215339}
}
EUVIMED