EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Performance Analysis of an Electromagnetic Load-Reduction Thrust Bearing System for Large Hydro-Generators

Lijie Hu, Xiyang Zou, Chao Guo, Peihao Jiang, Chengyou Nan, Jian Wu

Energies · 17.11.2026 · 19 (22) · 5550

DOI: 10.3390/en19225550 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 17.11.2026. Verfasst von Lijie Hu und 5 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As hydro-generator units trend toward higher capacity and rotational speed, conventional thrust bearings face increasing challenges in terms of friction loss, pad temperature, and oil-film reliability. This paper presents an electromagnetic load-reduction thrust bearing system that employs a stationary iron core fixed to the concrete foundation and an active iron core coupled to the generator rotor, generating an electromagnetic axial force to offload up to approximately 80% of the total thrust load. Two distinct bearing design philosophies under load-reduction conditions were comparatively evaluated for three representative unit types: a high-speed pumped-storage unit (Yangjiang, 500 r/min), a giant hydro-generator unit (Baihetan, 107.1 r/min), and a conventional 300–500 MW Francis unit (Huangdeng, 111.1 r/min). Results show that retaining the original bearing geometry under load reduction provides significant benefits in pad temperature reduction and oil-film thickness increase but yields limited friction-loss reduction (85–92% of the full-load loss at 60% load). Conversely, redesigning the bearing pad area proportionally to the load reduction achieves a friction loss of 58–67.5% of the full-load value at 60% load, while maintaining acceptable operating parameters. The findings provide design guidance for applying electromagnetic load-reduction technology to different hydro-generator unit categories. The magnetic-circuit analysis served for preliminary structural sizing, and the final load capacity was verified by finite-element simulation.

Zitieren

APA

Hu, L., Zou, X., Guo, C., Jiang, P., Nan, C., & Wu, J. (2026). Design and Performance Analysis of an Electromagnetic Load-Reduction Thrust Bearing System for Large Hydro-Generators. Energies, 19(22), 5550. https://doi.org/10.3390/en19225550

Vancouver

Hu L, Zou X, Guo C, Jiang P, Nan C, Wu J. Design and Performance Analysis of an Electromagnetic Load-Reduction Thrust Bearing System for Large Hydro-Generators. Energies. 2026;19(22):5550. doi:10.3390/en19225550

BibTeX
@article{Hu2026,
  author = {Hu, Lijie and Zou, Xiyang and Guo, Chao and Jiang, Peihao and Nan, Chengyou and Wu, Jian},
  title = {Design and Performance Analysis of an Electromagnetic Load-Reduction Thrust Bearing System for Large Hydro-Generators},
  journal = {Energies},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {5550},
  doi = {10.3390/en19225550}
}
Kostenlos starten →