EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Novel Modular Multi-Unit Cell Permanent Magnet Thrust Bearing with Bionic Design and Load-Carrying Capacity Analysis

Xiangdong Yu, Qi Wang, Zhongsheng Yan, Wenfeng Yu, Xingyue Shang, Suimeng Zhou, Jimin Zhang

Applied Sciences · 03.04.2025 · 15 (7) · 3926

DOI: 10.3390/app15073926 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 03.04.2025. Verfasst von Xiangdong Yu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Permanent magnet thrust bearings have garnered significant attention due to their high rotational speeds, low noise levels, and excellent vibration-damping performance. However, existing designs of these bearings often suffer from low load-carrying capacity and are tailored to specific machines, which limits their broader applicability. To address these limitations, this paper proposes a novel modular multi-unit cell structure for permanent magnet thrust bearings. The load-carrying performance of this design is validated through theoretical analysis, simulation, and experimentation. The inspiration for this design comes from bionics and honeycomb structures, emphasizing modularization and the combination of multiple unit cells. The unit cell consists of four permanent magnets, and multiple unit cells can be connected to form a structure that replaces the traditional design of directly embedding a permanent magnet ring into the bearing structure. Moreover, the designed unit cell structure can expand in both axial and radial directions, allowing for the creation of various nested or cross structures tailored to specific usage requirements. With this modular approach, the theoretical model of the bearing structure can be extended from the traditional single-layer cross-nested structure to an arbitrary number of nested cross-nested configurations using the equivalent magnetic circuit method. The bearing’s performance is validated through finite element simulations and experimental testing. The results demonstrate that the bearing with a four-layer cross-nested structure achieves a maximum load capacity of 48.45 kN, with a deviation of 7.3% from the theoretical value and 4% from the simulation results. By leveraging the generalization of the unit cell, the maximum axial load capacity across various configurations ranges from 6.78 kN to 288.9 kN, significantly enhancing the bearing’s adaptability to diverse operational scenarios.

Zitieren

APA

Yu, X., Wang, Q., Yan, Z., Yu, W., Shang, X., Zhou, S., & Zhang, J. (2025). A Novel Modular Multi-Unit Cell Permanent Magnet Thrust Bearing with Bionic Design and Load-Carrying Capacity Analysis. Applied Sciences, 15(7), 3926. https://doi.org/10.3390/app15073926

Vancouver

Yu X, Wang Q, Yan Z, Yu W, Shang X, Zhou S, et al. A Novel Modular Multi-Unit Cell Permanent Magnet Thrust Bearing with Bionic Design and Load-Carrying Capacity Analysis. Applied Sciences. 2025;15(7):3926. doi:10.3390/app15073926

BibTeX
@article{Yu2025,
  author = {Yu, Xiangdong and Wang, Qi and Yan, Zhongsheng and Yu, Wenfeng and Shang, Xingyue and Zhou, Suimeng and Zhang, Jimin},
  title = {A Novel Modular Multi-Unit Cell Permanent Magnet Thrust Bearing with Bionic Design and Load-Carrying Capacity Analysis},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {7},
  pages = {3926},
  doi = {10.3390/app15073926}
}
Kostenlos starten →