EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Interplay Between Combustion and Component Thermal Loading in Next-Generation Marine Engines Employing Reactivity-Controlled Compression Ignition

Alireza Kakoee, Kian Golbaghi, Alberto Cafari, Aneesh Vasudev, Sadegh Mehranfar, Amin Mahmoudzadeh Andwari, Ben Smulter, Jari Hyvönen, Maciej Mikulski

Energies · 23.12.2025 · 19 (1) · 83

DOI: 10.3390/en19010083 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 23.12.2025. Verfasst von Alireza Kakoee und 8 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 84 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Business Finland.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Energy transition demands cleaner and more efficient marine engines, accelerating the development of reactivity-controlled compression ignition (RCCI) concepts with multi-fuel capability. However, the coupling between combustion behavior and thermal loading in RCCI engines remains insufficiently understood due to limited experimental capabilities and the absence of integrated modeling tools. This study develops a rapid predictive framework that dynamically couples an in-house chemical-kinetics solver with a GT-Suite engine model and a finite-element wall thermal solver. The framework was calibrated against measurements from a single-cylinder research engine representative of the Wärtsilä 31DF medium-speed NG/LFO RCCI engine. It accurately captured component temperatures and combustion/performance parameters with RMS errors below 5% and cycle times under four minutes. The results show that RCCI operation introduces pronounced component temperature variations across the load range, creating challenges for thermal management and combustion control. Low-load combustion inefficiencies were linked to cylinder head thermal design rather than the conventional flame-quenching explanation. At high load, excessive pressure-rise rates amplified heat transfer demands, with exhaust-valve temperatures exceeding 780 K and posing pre-ignition risks. Increasing coolant temperature by 40 K reduced methane slip by 10% and advanced combustion by nearly 2 CAD, improving efficiency at low load, while coordinated lambda/fuel-blend control lowered peak combustion temperature by ~200 K at high load, mitigating thermal-induced pre-ignition without compromising performance or emissions.

Förderung

  • Business Finland

Zitieren

APA

Kakoee, A., Golbaghi, K., Cafari, A., Vasudev, A., Mehranfar, S., Andwari, A. M., Smulter, B., Hyvönen, J., & Mikulski, M. (2025). The Interplay Between Combustion and Component Thermal Loading in Next-Generation Marine Engines Employing Reactivity-Controlled Compression Ignition. Energies, 19(1), 83. https://doi.org/10.3390/en19010083

Vancouver

Kakoee A, Golbaghi K, Cafari A, Vasudev A, Mehranfar S, Andwari AM, et al. The Interplay Between Combustion and Component Thermal Loading in Next-Generation Marine Engines Employing Reactivity-Controlled Compression Ignition. Energies. 2025;19(1):83. doi:10.3390/en19010083

BibTeX
@article{Kakoee2025,
  author = {Kakoee, Alireza and Golbaghi, Kian and Cafari, Alberto and Vasudev, Aneesh and Mehranfar, Sadegh and Andwari, Amin Mahmoudzadeh and Smulter, Ben and Hyvönen, Jari and Mikulski, Maciej},
  title = {The Interplay Between Combustion and Component Thermal Loading in Next-Generation Marine Engines Employing Reactivity-Controlled Compression Ignition},
  journal = {Energies},
  year = {2025},
  volume = {19},
  number = {1},
  pages = {83},
  doi = {10.3390/en19010083}
}
Kostenlos starten →