Design for Loss Reduction in a Compact AFPM Electric Water Pump with a PCB Motor
Energies · 14.05.2025 · 18 (10) · 2538
DOI: 10.3390/en18102538 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 14.05.2025. Verfasst von Do-Hyeon Choi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning, Ministry of Trade Industry & Energy.
Abstract (Originalsprache)
A PCB stator axial flux permanent magnet (AFPM) motor is presented that overcomes the manufacturing challenges associated with the complex geometry of conventional stators by employing a PCB substrate. Traditionally, AFPM motors are produced by winding coils around the stator teeth, a process that requires specialized winding machinery and is both labor intensive and time consuming, ultimately incurring considerable manufacturing costs and delays. In contrast, PCB substrates offer significant advantages in manufacturability and mass production, effectively resolving these issues. Furthermore, the primary material used in PCB substrates, FR-4, exhibits a permeability similar to that of air, resulting in negligible electromagnetic cogging torque. Cogging torque arises from the attraction between permanent magnets and stator teeth, creating forces that interfere with motor rotation and generate unwanted vibration, noise, and potential mechanical collisions between the rotor and stator. In the PCB stator design, the conventional PCB circuit pattern is replaced by the motor’s coil configuration, and the absence of stator teeth eliminates these interference issues. Consequently, a slotless motor configuration with minimal vibration and noise is achieved. The PCB AFPM motor has been applied to a vehicle-mounted electric water pump (EWP), where mass production and space efficiency are critical. In an EWP, which integrates the impeller with the motor, it is essential that vibrations are minimized since excessive vibration could compromise impeller operation and, due to fluid resistance, require high power input. Moreover, the AFPM configuration facilitates higher torque generation compared to a conventional radial flux permanent magnet synchronous motor (RFPM). In a slotless AFPM motor, the absence of stator teeth prevents core flux saturation, thereby further enhancing torque performance. AC losses occur in the conductors as a result of the magnetic flux produced by the permanent magnets, and similar losses arise within the PCB circuits. Therefore, an optimized PCB circuit design is essential to reduce these losses. The Constant Trace Conductor (CTC) PCB circuit design process is proposed as a viable solution to mitigate AC losses. A 3D finite element analysis (3D FEA) model was developed, analyzed, fabricated, and validated to verify the proposed solution.
Förderung
- Korea Institute of Energy Technology Evaluation and Planning
- Ministry of Trade Industry & Energy
Zitieren
APA
Choi, D., Han, H., Hong, M., Jung, D., & Kim, W. (2025). Design for Loss Reduction in a Compact AFPM Electric Water Pump with a PCB Motor. Energies, 18(10), 2538. https://doi.org/10.3390/en18102538
Vancouver
Choi D, Han H, Hong M, Jung D, Kim W. Design for Loss Reduction in a Compact AFPM Electric Water Pump with a PCB Motor. Energies. 2025;18(10):2538. doi:10.3390/en18102538
BibTeX
@article{Choi2025,
author = {Choi, Do-Hyeon and Han, Hyung-Sub and Hong, Min-Ki and Jung, Dong-Hoon and Kim, Won-Ho},
title = {Design for Loss Reduction in a Compact AFPM Electric Water Pump with a PCB Motor},
journal = {Energies},
year = {2025},
volume = {18},
number = {10},
pages = {2538},
doi = {10.3390/en18102538}
}
EUVIMED