On the Iron Loss Reduction Design Improvement of an Axial Flux Permanent Magnet Motor
Actuators · 05.12.2025 · 14 (12) · 595
DOI: 10.3390/act14120595 ↗Kurz gefasst
Fachartikel in der Zeitschrift Actuators, online erschienen am 05.12.2025. Verfasst von Seung-Mi Oh und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korean Government.
Abstract (Originalsprache)
Reducing iron loss in axial flux permanent magnet (AFPM) motors is critical for improving efficiency. This study proposes a design-optimization procedure that combines 3D finite-element analysis (FEA) data with an artificial neural network (ANN) surrogate. For four design variables—airgap length, rotor back-yoke thickness, stator slot width, and stator slot depth—the search bounds were defined to avoid tooth and back-yoke saturation, and the corresponding space was sampled to construct a dataset. Using this dataset, the ANN was trained and then used to explore low-iron loss solutions. On an independent validation set, ANN predictions showed high agreement with 3D-FEA reference values, enabling rapid evaluation of many design candidates. As a result of the optimization, total iron loss decreased relative to the baseline, and torque increased by 3 Nm. These results demonstrate that the ANN-based surrogate model can reliably perform geometry-dependent iron loss optimization in AFPM motors, providing a fast and accurate alternative to repetitive 3D-FEA evaluations.
Förderung
- Korean Government
Zitieren
APA
Oh, S., Akatsu, K., Lee, D., & Lee, H. (2025). On the Iron Loss Reduction Design Improvement of an Axial Flux Permanent Magnet Motor. Actuators, 14(12), 595. https://doi.org/10.3390/act14120595
Vancouver
Oh S, Akatsu K, Lee D, Lee H. On the Iron Loss Reduction Design Improvement of an Axial Flux Permanent Magnet Motor. Actuators. 2025;14(12):595. doi:10.3390/act14120595
BibTeX
@article{Oh2025,
author = {Oh, Seung-Mi and Akatsu, Kan and Lee, Dong-Woo and Lee, Ho-Joon},
title = {On the Iron Loss Reduction Design Improvement of an Axial Flux Permanent Magnet Motor},
journal = {Actuators},
year = {2025},
volume = {14},
number = {12},
pages = {595},
doi = {10.3390/act14120595}
}
EUVIMED