Multi-Objective Optimization Strategy for Permanent Magnet Synchronous Motor Based on Combined Surrogate Model and Optimization Algorithm
Energies · 06.02.2023 · 16 (4) · 1630
DOI: 10.3390/en16041630 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 06.02.2023. Verfasst von Yinquan Yu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Ministry of science and technology of China, long-term project of innovative leading talents in the “Double Thousand Plan” of Jiangxi Province.
Abstract (Originalsprache)
When a permanent magnet synchronous motor (PMSM) is designed according to the traditional motor design theory, the performance of the motor is often challenging to achieve the desired goal, and further optimization of the motor design parameters is usually required. However, the motor is a strongly coupled, non-linear, multivariate complex system, and it is a challenge to optimize the motor by traditional optimization methods. It needs to rely on reliable surrogate models and optimization algorithms to improve the performance of the PMSM, which is one of the problematic aspects of motor optimization. Therefore, this paper proposes a strategy based on a combination of a high-precision combined surrogate model and the optimization method to optimize the stator and rotor structures of interior PMSM (IPMSM). First, the variables were classified into two layers with high and low sensitivity based on the comprehensive parameter sensitivity analysis. Then, Latin hypercube sampling (LHS) is used to obtain sample points for highly sensitive variables, and various methods are employed to construct surrogate models for variables. Each optimization target is based on the acquired sample points, from which the most accurate combined surrogate model is selected and combined with non-dominated ranking genetic algorithm-II (NSGA-II) to find the best. After optimizing the high-sensitivity variables, a new finite element model (FEM) is built, and the Taguchi method is used to optimize the low-sensitivity variables. Finally, finite element analysis (FEA) was adopted to compare the performance of the initial model and the optimized ones of the IPMSM. The results showed that the performance of the optimized motor is improved to prove the effectiveness and reliability of the proposed method.
Förderung
- National Natural Science Foundation of China
- Ministry of science and technology of China
- long-term project of innovative leading talents in the “Double Thousand Plan” of Jiangxi Province
Zitieren
APA
Yu, Y., Pan, Y., Chen, Q., Hu, Y., Gao, J., Zhao, Z., Niu, S., & Zhou, S. (2023). Multi-Objective Optimization Strategy for Permanent Magnet Synchronous Motor Based on Combined Surrogate Model and Optimization Algorithm. Energies, 16(4), 1630. https://doi.org/10.3390/en16041630
Vancouver
Yu Y, Pan Y, Chen Q, Hu Y, Gao J, Zhao Z, et al. Multi-Objective Optimization Strategy for Permanent Magnet Synchronous Motor Based on Combined Surrogate Model and Optimization Algorithm. Energies. 2023;16(4):1630. doi:10.3390/en16041630
BibTeX
@article{Yu2023,
author = {Yu, Yinquan and Pan, Yue and Chen, Qiping and Hu, Yiming and Gao, Jian and Zhao, Zhao and Niu, Shuangxia and Zhou, Shaowei},
title = {Multi-Objective Optimization Strategy for Permanent Magnet Synchronous Motor Based on Combined Surrogate Model and Optimization Algorithm},
journal = {Energies},
year = {2023},
volume = {16},
number = {4},
pages = {1630},
doi = {10.3390/en16041630}
}
EUVIMED