Multi-Objective Optimization of a V-Shaped Interior Permanent Magnet Synchronous Motor for Electric Tractor Drives
Applied Sciences · 11.08.2026 · 16 (16) · 8012
DOI: 10.3390/app16168012 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 11.08.2026. Verfasst von Xiaodong Lv und 5 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Province Integrated Pilot Project for Agricultural Machinery R&D, Manufacturing, Promotion and Application, Key Research and Development Program of Shandong Province, Anhui Province Integrated Pilot Project for Agricultural Machinery R&D, Manufacturing, Promotion and Application.
Abstract (Originalsprache)
Electric tractor traction motors require stable torque under low-speed, heavy-load operation. This study investigates a 40 kW, 3000 r/min V-shaped interior permanent magnet synchronous motor (IPMSM) and develops a rotor structure optimization procedure integrating Maxwell finite element analysis, Latin hypercube sampling, sensitivity screening, and the non-dominated sorting genetic algorithm II (NSGA-II). The magnetic bridge thickness (HRib) and permanent magnet thickness (ThickMag) were ranked highest by the linear screening and retained for the reduced two-variable refinement and set to 1.92 and 5.36 mm, respectively. The optimized design maintained the average electromagnetic torque at 119.40 N·m, while the peak-to-peak cogging torque decreased from 5.94 to 1.66 N·m and the loaded torque ripple coefficient decreased from 17.46% to 2.90%. Prototype tests yielded a peak-to-peak cogging torque of 1.85 N·m, 11.45% above the optimized finite element result. At 800 r/min and approximately 120 N·m, the measured average shaft torque, peak-to-peak torque, and ripple coefficient were 118.50 N·m, 5.83 N·m, and 4.92%, respectively. The larger experimental ripple is consistent with combined electromagnetic, control, measurement, and drivetrain effects absent from the electromagnetic model; their individual contributions are not identified by the present data, so the loaded result is interpreted only as trend-level evidence at the tested point.
Förderung
- Shandong Province Integrated Pilot Project for Agricultural Machinery R&D, Manufacturing, Promotion and Application
- Key Research and Development Program of Shandong Province
- Anhui Province Integrated Pilot Project for Agricultural Machinery R&D, Manufacturing, Promotion and Application
Zitieren
APA
Lv, X., Liu, Z., Liu, F., Li, J., Xu, J., & Chen, M. (2026). Multi-Objective Optimization of a V-Shaped Interior Permanent Magnet Synchronous Motor for Electric Tractor Drives. Applied Sciences, 16(16), 8012. https://doi.org/10.3390/app16168012
Vancouver
Lv X, Liu Z, Liu F, Li J, Xu J, Chen M. Multi-Objective Optimization of a V-Shaped Interior Permanent Magnet Synchronous Motor for Electric Tractor Drives. Applied Sciences. 2026;16(16):8012. doi:10.3390/app16168012
BibTeX
@article{Lv2026,
author = {Lv, Xiaodong and Liu, Zhaoyue and Liu, Feng and Li, Jinliang and Xu, Jikang and Chen, Mengwei},
title = {Multi-Objective Optimization of a V-Shaped Interior Permanent Magnet Synchronous Motor for Electric Tractor Drives},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {16},
pages = {8012},
doi = {10.3390/app16168012}
}
EUVIMED