Design and Optimization Method with Independent Radial and Axial Capacity for 3-DOF Magnetic Bearings in Flywheel
Energies · 01.01.2023 · 16 (1) · 483
DOI: 10.3390/en16010483 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 01.01.2023. Verfasst von Jintao Ju und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Industry University Research Cooperation Project of Jiangsu Province.
Abstract (Originalsprache)
The six-pole radial–axial hybrid magnetic bearing (RAHMB) has the advantages of small space and low power consumption, making it suitable for flywheel batteries. The bearing capacity and the volume are the main specifications of magnetic bearings that should be considered comprehensively. In this work, the six-pole RAHMB was used in a horizontal flywheel battery. As the axial bearing capacity is relatively smaller than the radial bearing capacity, a design method with independent radial and axial bearing capacity is proposed, and the parameters are optimized to minimize the volume. The mathematical model of six-pole RAHMB was derived from the equivalent magnetic circuit method. The relationships between bearing capacity, biased flux density, saturation flux density and the section area of magnetic poles were analyzed. The basic principle of the design method with independent radial and axial bearing capacity is to determine which five of the variables are preferred. According to the design method, one radial or axial biased flux density should be optimized to minimize the volume, and the genetic algorithm (GA) was adopted to search for the optimal value. The structural parameters were designed based on the optimized value of biased flux density. The total volume of the six-pole RAHMB was reduced by 24%. A 3D finite element (FE) model was built. The analysis results and experimental results show that the proposed design and the optimization method are feasible and valid.
Förderung
- Industry University Research Cooperation Project of Jiangsu Province
Zitieren
APA
Ju, J., Xu, P., Li, S., Xu, T., Ju, F., & Du, J. (2023). Design and Optimization Method with Independent Radial and Axial Capacity for 3-DOF Magnetic Bearings in Flywheel. Energies, 16(1), 483. https://doi.org/10.3390/en16010483
Vancouver
Ju J, Xu P, Li S, Xu T, Ju F, Du J. Design and Optimization Method with Independent Radial and Axial Capacity for 3-DOF Magnetic Bearings in Flywheel. Energies. 2023;16(1):483. doi:10.3390/en16010483
BibTeX
@article{Ju2023,
author = {Ju, Jintao and Xu, Peng and Li, Shuqing and Xu, Tong and Ju, Fangming and Du, Jiahui},
title = {Design and Optimization Method with Independent Radial and Axial Capacity for 3-DOF Magnetic Bearings in Flywheel},
journal = {Energies},
year = {2023},
volume = {16},
number = {1},
pages = {483},
doi = {10.3390/en16010483}
}
EUVIMED