EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

Passive and Active Redundancy in Four-Wheel Omnidirectional Mobile Robots: Load Distribution and Friction Optimization

Kenji Kimura

Electronics · 2026-11-20 · 15 (22) · 5422

DOI: 10.3390/electronics15225422 ↗

At a glance

Journal article in Electronics, published online on 2026-11-20. Written by Kenji Kimura. The full text is freely available (open access, CC BY 4.0).

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

This study presents a unified theoretical comparison of three-wheel and four-wheel omnidirectional mobile robots with regular wheel arrangements, focusing on kinematic isotropy, support geometry, acceleration-induced load transfer, and friction feasibility. Although both configurations provide three degrees of freedom in planar motion, the four-wheel mechanism introduces two distinct forms of redundancy: passive redundancy associated with the indeterminate distribution of normal wheel loads and active redundancy arising from redundant driving-force allocation. These two forms of redundancy are formulated separately to clarify their physical roles and effects on contact and friction performance. Under a prescribed reference normal-load distribution, conventional driving-force allocation based on the Moore–Penrose pseudoinverse is compared with an allocation that minimizes the maximum friction utilization among the wheels. Both configurations exhibit Euclidean-norm isotropy of the pure-translation Jacobian. Although four wheels enlarge the geometric support region, this does not necessarily improve all-wheel contact feasibility or reduce friction requirements. For the sampled conditions with ζ=0 and a friction threshold of 0.30, the fraction of all grid points satisfying both contact and friction criteria increased from 37.41% to 77.88% through friction-optimal allocation. The results are based on a quasi-static model. The proposed framework provides a theoretical basis for selecting wheel configurations and evaluating redundant driving-force allocation in omnidirectional mobile robots.

Cite

APA

Kimura, K. (2026). Passive and Active Redundancy in Four-Wheel Omnidirectional Mobile Robots: Load Distribution and Friction Optimization. Electronics, 15(22), 5422. https://doi.org/10.3390/electronics15225422

Vancouver

Kimura K. Passive and Active Redundancy in Four-Wheel Omnidirectional Mobile Robots: Load Distribution and Friction Optimization. Electronics. 2026;15(22):5422. doi:10.3390/electronics15225422

BibTeX
@article{Kimura2026,
  author = {Kimura, Kenji},
  title = {Passive and Active Redundancy in Four-Wheel Omnidirectional Mobile Robots: Load Distribution and Friction Optimization},
  journal = {Electronics},
  year = {2026},
  volume = {15},
  number = {22},
  pages = {5422},
  doi = {10.3390/electronics15225422}
}
Start for free →