EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Passive Thermal Management of an Electric Vehicle Wireless Charging Receiver Using Electrically Insulating Silicone Thermal Interface Materials

Ziying Song, Jiajie Liu, Sicheng Yi, Xinyue Liu, Yelin Si, Feng Li, Ting Yin

Electronics · 2026-11-19 · 15 (22) · 5389

DOI: 10.3390/electronics15225389 ↗

At a glance

Journal article in Electronics, published online on 2026-11-19. Written by Ziying Song and 6 co-authors. 22 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Natural Science Foundation of China.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

This study evaluates electrically insulating silicone thermal interface materials (TIMs) at the coil-to-ferrite and ferrite-to-shield interfaces of an electric-vehicle wireless charging receiver. A steady-state Maxwell–Icepak model compares TIM conductivity, interface location, and coverage using prescribed winding currents of 15 A peak at 85 kHz and an ambient temperature of 25 °C. For the bare receiver, the predicted coil hotspot is 82.49 °C, which is 2.51 °C below the study’s internal screening reference of 85 °C. With TIM-B at both interfaces and 100% coverage, the predicted hotspot falls to 64.54 °C, a reduction of 17.95 °C. A single TIM-B layer retains 83.7–85.1% of this reduction while using half the TIM volume. At 110% and 120% coverage, the predicted coil hotspots are 59.90 and 60.28 °C. Their 0.38 °C difference does not support a definitive ranking. These results apply to the modeled geometry, thermal boundaries, and fixed-current excitation.

Funding

  • National Natural Science Foundation of China

Cite

APA

Song, Z., Liu, J., Yi, S., Liu, X., Si, Y., Li, F., & Yin, T. (2026). Passive Thermal Management of an Electric Vehicle Wireless Charging Receiver Using Electrically Insulating Silicone Thermal Interface Materials. Electronics, 15(22), 5389. https://doi.org/10.3390/electronics15225389

Vancouver

Song Z, Liu J, Yi S, Liu X, Si Y, Li F, et al. Passive Thermal Management of an Electric Vehicle Wireless Charging Receiver Using Electrically Insulating Silicone Thermal Interface Materials. Electronics. 2026;15(22):5389. doi:10.3390/electronics15225389

BibTeX
@article{Song2026,
  author = {Song, Ziying and Liu, Jiajie and Yi, Sicheng and Liu, Xinyue and Si, Yelin and Li, Feng and Yin, Ting},
  title = {Passive Thermal Management of an Electric Vehicle Wireless Charging Receiver Using Electrically Insulating Silicone Thermal Interface Materials},
  journal = {Electronics},
  year = {2026},
  volume = {15},
  number = {22},
  pages = {5389},
  doi = {10.3390/electronics15225389}
}
Start for free →