EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Real-Time Mechanical Load Emulation Using a Multicore MCU and EtherCAT with a Fixed-Firmware Commercial Load-Motor Drive

Seung-Hun Lee, Duc M. Tran, Joon-Young Choi

Electronics · 2026-11-14 · 15 (22) · 5296

DOI: 10.3390/electronics15225296 ↗

At a glance

Journal article in Electronics, published online on 2026-11-14. Written by Seung-Hun Lee and 2 co-authors. 23 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Research Foundation of Korea.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Mechanical-load emulation enables motor-drive testing under different load conditions without physically replacing the load. However, forward-dynamics-based mechanical-load emulation is challenging when a commercial load-motor drive has fixed proprietary firmware. This paper presents a real-time architecture that relocates the desired-load model, position-tracking controller, and compensation algorithm to a programmable test-motor drive, while the commercial load-motor drive operates in its standard torque-control mode. A TMS320F28388D multicore MCU distributes test-motor control, load-emulation computation, and EtherCAT communication among two DSP cores and a Connectivity Manager core. The load-emulation algorithm executes at 1 kHz, while EtherCAT process data are exchanged every 250 µs. The discrete-time realization and its nominal stability are analytically and numerically verified. Experiments with two inertia–viscous-friction load conditions show close agreement between measured and simulated motion, with position RMSEs of 0.043 and 0.069 rad under the 250 µs EtherCAT communication period and 0.1 ms torque-reference input-filter setting. The maximum measured on-board processing delay through EtherCAT process-data write completion was 19.597 µs. Additional tests demonstrate that shortening the EtherCAT communication period improves or maintains emulation accuracy, while variations in the torque-reference input-filter time constant have a limited effect. These results demonstrate the feasibility of implementing forward-dynamics-based mechanical-load emulation using a commercial servo drive without modifying its internal control firmware.

Funding

  • National Research Foundation of Korea

Cite

APA

Lee, S., Tran, D. M., & Choi, J. (2026). Real-Time Mechanical Load Emulation Using a Multicore MCU and EtherCAT with a Fixed-Firmware Commercial Load-Motor Drive. Electronics, 15(22), 5296. https://doi.org/10.3390/electronics15225296

Vancouver

Lee S, Tran DM, Choi J. Real-Time Mechanical Load Emulation Using a Multicore MCU and EtherCAT with a Fixed-Firmware Commercial Load-Motor Drive. Electronics. 2026;15(22):5296. doi:10.3390/electronics15225296

BibTeX
@article{Lee2026,
  author = {Lee, Seung-Hun and Tran, Duc M. and Choi, Joon-Young},
  title = {Real-Time Mechanical Load Emulation Using a Multicore MCU and EtherCAT with a Fixed-Firmware Commercial Load-Motor Drive},
  journal = {Electronics},
  year = {2026},
  volume = {15},
  number = {22},
  pages = {5296},
  doi = {10.3390/electronics15225296}
}
Start for free →