Analysis of Winding Losses in Permanent Magnet Synchronous Motors with Multilayer Thin Flat-Wire Windings
Electronics · 16.06.2026 · 15 (12) · 2665
DOI: 10.3390/electronics15122665 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 16.06.2026. Verfasst von Simeng Zhong und 5 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Flat-wire windings have been widely used in high-power-density electric vehicle motors because of their high slot fill factor and high efficiency. However, conventional flat-wire conductors usually have relatively large cross-sectional dimensions, which may lead to significant AC winding losses under high-frequency operation due to the combined effects of the rotor magnetic field and the armature-reaction field. To address this issue, this paper proposes a multilayer thin flat-wire continuous-wave winding and its end-winding transposition method. The parallel multilayer thin flat-wire structure effectively suppresses AC losses by reducing the characteristic dimension of each conductor, while the end-winding transposition method reduces or even eliminates circulating-current losses among parallel strands without compromising slot utilization. An analytical calculation method is established to investigate the AC loss characteristics of the multilayer thin flat-wire winding, and the main influencing factors of winding losses are analyzed. To address the circulating-current loss issue, the loss suppression effect of the transposition method is quantitatively evaluated, and an intermittent transposition method with both effective circulating-current suppression and fewer end-winding crossovers is proposed. Finally, the proposed method is validated by finite-element analysis (FEA) and prototype experiments. The results show that the proposed winding can significantly reduce AC losses over a wide speed range, providing a low loss and manufacturable winding design solution for high-power-density electric vehicle traction motors.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhong, S., Zhang, X., Liu, A., Zhang, B., Cao, Y., & Liu, D. (2026). Analysis of Winding Losses in Permanent Magnet Synchronous Motors with Multilayer Thin Flat-Wire Windings. Electronics, 15(12), 2665. https://doi.org/10.3390/electronics15122665
Vancouver
Zhong S, Zhang X, Liu A, Zhang B, Cao Y, Liu D. Analysis of Winding Losses in Permanent Magnet Synchronous Motors with Multilayer Thin Flat-Wire Windings. Electronics. 2026;15(12):2665. doi:10.3390/electronics15122665
BibTeX
@article{Zhong2026,
author = {Zhong, Simeng and Zhang, Xiaoting and Liu, Aimin and Zhang, Bingyi and Cao, Yongpeng and Liu, Decai},
title = {Analysis of Winding Losses in Permanent Magnet Synchronous Motors with Multilayer Thin Flat-Wire Windings},
journal = {Electronics},
year = {2026},
volume = {15},
number = {12},
pages = {2665},
doi = {10.3390/electronics15122665}
}
EUVIMED