Thermal Influence of Physical Parameters of Additively Manufactured Windings in Permanent Magnet Synchronous Motors
IEEE Transactions on Transportation Electrification · 2025-10 · 11 (5) · 12264-12272
DOI: 10.1109/tte.2025.3587769 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2025-10. Verfasst von Yue Yang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Aviation Science Foundation of China.
Abstract (Originalsprache)
For permanent magnet synchronous motor (PMSM), additively manufactured (AM) windings with variable cross-sectional shapes offer significant advantages in enhancing the slot fill factor and thermal properties, thereby contributing to an increase in power density. This article presents a thermal model for AM windings of PMSM that accounts for the anisotropy of the equivalent insulation thermal conductivity at various locations within the slot. This model improves the accuracy of the predicted winding temperature rise. The physical parameters of AM windings can be controlled by modifying the printing parameters and postprocessing conditions. The impact of electrical conductivity, thermal conductivity, and winding insulation parameters on the losses and temperature rise of PMSMs at various frequencies is then investigated. Finally, the temperature rise characteristics of the prototype PMSMs with the AM windings and the conventional windings are tested and compared, thereby confirming the validity of the thermal model for AM windings as well as their superior thermal properties.
Förderung
- National Natural Science Foundation of China
- Aviation Science Foundation of China
Zitieren
APA
Yang, Y., Huang, X., Liu, Y., Wang, Z., Tan, Q., & Li, J. (2025). Thermal Influence of Physical Parameters of Additively Manufactured Windings in Permanent Magnet Synchronous Motors. IEEE Transactions on Transportation Electrification, 11(5), 12264-12272. https://doi.org/10.1109/tte.2025.3587769
Vancouver
Yang Y, Huang X, Liu Y, Wang Z, Tan Q, Li J. Thermal Influence of Physical Parameters of Additively Manufactured Windings in Permanent Magnet Synchronous Motors. IEEE Transactions on Transportation Electrification. 2025;11(5):12264-12272. doi:10.1109/tte.2025.3587769
BibTeX
@article{Yang2025,
author = {Yang, Yue and Huang, Xuzhen and Liu, Yansong and Wang, Zheng and Tan, Qiang and Li, Jing},
title = {Thermal Influence of Physical Parameters of Additively Manufactured Windings in Permanent Magnet Synchronous Motors},
journal = {IEEE Transactions on Transportation Electrification},
year = {2025},
volume = {11},
number = {5},
pages = {12264--12272},
doi = {10.1109/tte.2025.3587769}
}
EUVIMED