EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

Jensen–Shannon Divergence Weighted Computational Imaging for Multi-Depth Target Reconstruction with Single-Photon Lidar

Kai Yuan, Chunyang Wang, Zengxun Li, Xuelian Liu, Xuyang Wei, Rong Li

Electronics · 2026-05-23 · 15 (11) · 2260

DOI: 10.3390/electronics15112260 ↗

At a glance

Journal article in Electronics, published online on 2026-05-23. Written by Kai Yuan and 5 co-authors. Cited 1 times so far (Crossref); 24 references. The full text is freely available (open access, CC BY 4.0). Funded by: Shaanxi Province Natural Science Foundation Research Project.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

To address the challenge of accurately reconstructing multi-depth targets using single-photon Light Detection and Ranging (LiDAR) under few-frame conditions in high-precision applications such as autonomous driving perception, remote sensing, and military reconnaissance, this paper proposes a computational imaging method named the Jensen–Shannon Divergence Weighted Pixel Fusion Constant False Alarm Rate (JSWPF-CFAR) approach. First, the proposed method utilizes the Jensen–Shannon (JS) divergence to characterize the statistical similarity between adjacent pixels, thereby constructing adaptive weights to achieve the effective fusion of echo signals. The key innovation lies in the formulation of a JS divergence-based weighting factor, which fully exploits the inherent spatial correlation within 3D target structures to optimize the pixel fusion process and enhance the signal statistics of target echoes. Subsequently, a CFAR detection model tailored for Geiger-mode Avalanche Photodiode (GM-APD) multi-depth echo signals is constructed to estimate the noise photon count within a local sliding window; this estimate is then used to calculate a photon counting threshold for identifying and extracting high-confidence target intervals. Finally, a peak-picking method is employed to perform the 3D reconstruction of multi-depth targets. Compared with existing techniques such as matched filtering and Reversible Jump Markov Chain Monte Carlo (RJMCMC), the proposed method exhibits superior reconstruction quality under few-frame and low Signal-to-Background Ratio (SBR) conditions. The experimental results demonstrate that the proposed method achieves an improvement in target restoration degree (RD) of at least 21.16% and a relative variance (Var) optimization of at least 62.90% over the matched filtering and RJMCMC baselines. These results indicate that the proposed approach effectively enhances the multi-depth estimation performance of single-photon LiDAR in complex scenes.

Funding

  • Shaanxi Province Natural Science Foundation Research Project

Cite

APA

Yuan, K., Wang, C., Li, Z., Liu, X., Wei, X., & Li, R. (2026). Jensen–Shannon Divergence Weighted Computational Imaging for Multi-Depth Target Reconstruction with Single-Photon Lidar. Electronics, 15(11), 2260. https://doi.org/10.3390/electronics15112260

Vancouver

Yuan K, Wang C, Li Z, Liu X, Wei X, Li R. Jensen–Shannon Divergence Weighted Computational Imaging for Multi-Depth Target Reconstruction with Single-Photon Lidar. Electronics. 2026;15(11):2260. doi:10.3390/electronics15112260

BibTeX
@article{Yuan2026,
  author = {Yuan, Kai and Wang, Chunyang and Li, Zengxun and Liu, Xuelian and Wei, Xuyang and Li, Rong},
  title = {Jensen–Shannon Divergence Weighted Computational Imaging for Multi-Depth Target Reconstruction with Single-Photon Lidar},
  journal = {Electronics},
  year = {2026},
  volume = {15},
  number = {11},
  pages = {2260},
  doi = {10.3390/electronics15112260}
}
Start for free →