EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Open-Circuit Fault Location Method of Lightweight Modular Multilevel Converter for Deloading Operation of Offshore Wind Power

Zhehao Fang, Haoyang Cui

Electronics · 18.03.2026 · 15 (6) · 1277

DOI: 10.3390/electronics15061277 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 18.03.2026. Verfasst von Zhehao Fang und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shanghai.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In offshore wind farms, modular multilevel converters (MMCs) may operate under a deloading condition to accommodate wind-speed volatility and dispatch constraints. Here, deloading is defined as transmitted power < 0.2 pu (scenario S2, low-power non-reversal). Under this condition, submodule capacitor-voltage fault signatures are weak and exhibit strong operating-point-dependent drift, which degrades conventional threshold-based or offline-trained methods. We propose a lightweight switch-level IGBT open-circuit fault localization framework for deloaded MMCs. Wavelet packet decomposition is used to extract time–frequency energy features, and principal component analysis reduces feature dimensionality for lightweight deployment. An enhanced XGBoost model further integrates severity-index weighting to alleviate class imbalance and incremental learning to adapt to condition drift induced by wind-power fluctuations. MATLAB2024b/Simulink results show 99.6% accuracy in S2 with less than 2 ms inference latency, and robust performance in extended scenarios including partial-power operation and power reversal.

Förderung

  • Natural Science Foundation of Shanghai

Zitieren

APA

Fang, Z., & Cui, H. (2026). Open-Circuit Fault Location Method of Lightweight Modular Multilevel Converter for Deloading Operation of Offshore Wind Power. Electronics, 15(6), 1277. https://doi.org/10.3390/electronics15061277

Vancouver

Fang Z, Cui H. Open-Circuit Fault Location Method of Lightweight Modular Multilevel Converter for Deloading Operation of Offshore Wind Power. Electronics. 2026;15(6):1277. doi:10.3390/electronics15061277

BibTeX
@article{Fang2026,
  author = {Fang, Zhehao and Cui, Haoyang},
  title = {Open-Circuit Fault Location Method of Lightweight Modular Multilevel Converter for Deloading Operation of Offshore Wind Power},
  journal = {Electronics},
  year = {2026},
  volume = {15},
  number = {6},
  pages = {1277},
  doi = {10.3390/electronics15061277}
}
Kostenlos starten →