Verification of Maximum Torque Per Joule Loss Control of a Wound-Rotor Synchronous Machine with Strongly Non-Linear Parameters
Electronics · 15.12.2025 · 14 (24) · 4924
DOI: 10.3390/electronics14244924 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 15.12.2025. Verfasst von Karel Hruska und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technological Agency of the Czech Republic.
Abstract (Originalsprache)
This paper presents an analytically derived optimal control strategy for wound-rotor synchronous machines (WRSM) based on minimising the Joule losses in both the stator and rotor windings. The presented control strategy is analysed in terms of analytical derivation, machine current ratios, working regions and constraints. It is experimentally verified on a salient-pole wound-rotor synchronous machine with strongly non-linear equivalent circuit parameters. The verification was performed in two stages: first, considering constant equivalent circuit parameters while assessing strong non-linear behaviour of the machine leading to significant discrepancies in the resulting machine torque. In the second stage, after determination of non-linear machine parameters using measured flux maps, identical control methodology is analysed in terms of variations in ratios between machine currents. Using pre-calculated current ratios the same control methodology is extended for machines with strongly non-linear equivalent circuit parameters and verified in a real environment. The measurement confirms expected machine behaviour in all available control regions achievable by used synchronous motor as well as limits between these control regions. The results of the verification in a real environment show a discrepancy of approximately 5% in measured machine torque in comparison to expected value confirming the validity of the analytically derived approach and introduced modifications for machines with non-linear equivalent circuit parameters.
Förderung
- Technological Agency of the Czech Republic
Zitieren
APA
Hruska, K., Glac, A., & Suchy, O. (2025). Verification of Maximum Torque Per Joule Loss Control of a Wound-Rotor Synchronous Machine with Strongly Non-Linear Parameters. Electronics, 14(24), 4924. https://doi.org/10.3390/electronics14244924
Vancouver
Hruska K, Glac A, Suchy O. Verification of Maximum Torque Per Joule Loss Control of a Wound-Rotor Synchronous Machine with Strongly Non-Linear Parameters. Electronics. 2025;14(24):4924. doi:10.3390/electronics14244924
BibTeX
@article{Hruska2025,
author = {Hruska, Karel and Glac, Antonin and Suchy, Ondrej},
title = {Verification of Maximum Torque Per Joule Loss Control of a Wound-Rotor Synchronous Machine with Strongly Non-Linear Parameters},
journal = {Electronics},
year = {2025},
volume = {14},
number = {24},
pages = {4924},
doi = {10.3390/electronics14244924}
}
EUVIMED