EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Thermal Fatigue Behaviors of BGA Packages with an Optimized Solder Joint Layout

Mohammed Abdel Razzaq, Michael Meilunas, Xian A. Cao, Jim Wilcox, Abdallah Ramini

Electronics · 2025-06-04 · 14 (11) · 2286

DOI: 10.3390/electronics14112286 ↗

At a glance

Journal article in Electronics, published online on 2025-06-04. Written by Mohammed Abdel Razzaq and 4 co-authors. Cited 12 times so far (Crossref); 28 references. The full text is freely available (open access, CC BY 4.0).

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Ball Grid Array (BGA) failures are often dominated by stress concentrations at the outer solder joints, particularly under thermomechanical loading. To mitigate this issue, this study investigates the mechanical and reliability implications of optimizing the BGA solder joint array by removing the outermost rows and columns, positioning all connections directly beneath the silicon die. Two commonly used solder alloys—SAC305 and Sn37Pb—were selected to evaluate the effects of this optimized array design. A combined experimental and numerical approach was employed, including accelerated thermal cycling (–40 °C to 125 °C), in situ resistance monitoring, cross-sectional failure analysis, and finite element modeling (FEM) to assess fatigue behavior under the altered layout. The optimized array significantly improved performance for SAC305, yielding a 1.67× increase in mean cycles-to-failure and a 29% reduction in peak von Mises stress, with failure locations shifting from the corners to more evenly distributed areas beneath the die. Sn37Pb assemblies showed only a 1.01× improvement despite an 11% stress reduction, attributed to persistent shear-dominated failures at second-row joints. These results highlight the critical influence of joint array architecture and solder alloy selection on reliability, offering design-level guidance for applications prioritizing thermomechanical robustness with reduced I/O counts.

Cite

APA

Razzaq, M. A., Meilunas, M., Cao, X. A., Wilcox, J., & Ramini, A. (2025). Thermal Fatigue Behaviors of BGA Packages with an Optimized Solder Joint Layout. Electronics, 14(11), 2286. https://doi.org/10.3390/electronics14112286

Vancouver

Razzaq MA, Meilunas M, Cao XA, Wilcox J, Ramini A. Thermal Fatigue Behaviors of BGA Packages with an Optimized Solder Joint Layout. Electronics. 2025;14(11):2286. doi:10.3390/electronics14112286

BibTeX
@article{Razzaq2025,
  author = {Razzaq, Mohammed Abdel and Meilunas, Michael and Cao, Xian A. and Wilcox, Jim and Ramini, Abdallah},
  title = {Thermal Fatigue Behaviors of BGA Packages with an Optimized Solder Joint Layout},
  journal = {Electronics},
  year = {2025},
  volume = {14},
  number = {11},
  pages = {2286},
  doi = {10.3390/electronics14112286}
}
Start for free →