Analysis and Design of Class-D Outphasing Power Amplifier with Non-Isolating Balun Combiner
Electronics · 28.05.2025 · 14 (11) · 2196
DOI: 10.3390/electronics14112196 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 28.05.2025. Verfasst von Jiyun Bae und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Institute of Information and communications Technology Planning and Evaluation (IITP), the Korea government (MSIT), the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT).
Abstract (Originalsprache)
This paper presents a class-D outphasing power amplifier (PA) that incorporates a non-isolating balun combiner employing a 180° phase shift. Both isolating and non-isolating outphasing combiners are analyzed for signal restoration and combining efficiency. The proposed non-isolating balun combiner employing the 180° phase shift was experimentally evaluated and compared with a commercial isolating Wilkinson combiner. When two constant-envelope signals derived from a 10 MHz long-term evolution (LTE) signal are applied to the inputs of the outphasing combiners, both combiners demonstrate successful signal reconstruction. The measured adjacent channel leakage ratios (ACLRs) are −47 dBc for the Wilkinson combiner and −46 dBc for the proposed balun combiner. At 6 dB power back-off (PBO), the proposed balun combiner achieves a combining efficiency of 85.1%, representing an improvement of nearly 60% over the Wilkinson combiner. With a center frequency of 650 MHz, targeting 5G FR1 applications, a class-D outphasing PA was designed in a 28 nm CMOS process using the measured S-parameter data from both outphasing combiners. Simulation results show that the class-D outphasing PA incorporating the proposed balun combiner achieves a peak drain efficiency (DE) of 82.9% with an output power of 17.7 dBm. At 6 dB PBO, the DE reaches 61%, which is approximately 37% higher than that of the outphasing PA using the Wilkinson combiner. Moreover, the designed outphasing PA supports broadband operation over the 360–860 MHz range.
Förderung
- the Institute of Information and communications Technology Planning and Evaluation (IITP), the Korea government (MSIT)
- the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT)
Zitieren
APA
Bae, J., Jeong, M., Yoo, S., Nam, I., & Lee, O. (2025). Analysis and Design of Class-D Outphasing Power Amplifier with Non-Isolating Balun Combiner. Electronics, 14(11), 2196. https://doi.org/10.3390/electronics14112196
Vancouver
Bae J, Jeong M, Yoo S, Nam I, Lee O. Analysis and Design of Class-D Outphasing Power Amplifier with Non-Isolating Balun Combiner. Electronics. 2025;14(11):2196. doi:10.3390/electronics14112196
BibTeX
@article{Bae2025,
author = {Bae, Jiyun and Jeong, Munsu and Yoo, Sangjin and Nam, Ilku and Lee, Ockgoo},
title = {Analysis and Design of Class-D Outphasing Power Amplifier with Non-Isolating Balun Combiner},
journal = {Electronics},
year = {2025},
volume = {14},
number = {11},
pages = {2196},
doi = {10.3390/electronics14112196}
}
EUVIMED