EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Analysis of the SEU Tolerance of an FPGA-Based Time-to-Digital Converter Using Emulation-Based Fault Injection

Roza Teklehaimanot Siecha, Getachew Alemu, Jeffrey Prinzie, Paul Leroux

Electronics · 2025-05-27 · 14 (11) · 2176

DOI: 10.3390/electronics14112176 ↗

At a glance

Journal article in Electronics, published online on 2025-05-27. Written by Roza Teklehaimanot Siecha and 3 co-authors. Cited 5 times so far (Crossref); 62 references. The full text is freely available (open access, CC BY 4.0). Funded by: Ethiopian Ministry of Education.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

In application domains where severe environmental conditions are unavoidable, including high-energy physics and nuclear power plants, accurate and dependable time-to-digital converters (TDCs) are essential components. Single-event upsets (SEUs) associated with the configuration memory of field-programmable gate array (FPGA)-based implementations are becoming common sources of performance degradation even in terrestrial areas. Hence, the need to test and mitigate the effects of SEUs on FPGA-based TDCs is crucial to ensure that the design achieves reliable performance under critical conditions. The TMR SEM IP provides real-time fault injection, and dynamic SEU monitoring and correction in safety critical conditions without intervening with the functionality of the system, unlike traditional fault injection methods. This paper presents a scalable and fast fault emulation framework that tests the effects of SEUs on the configuration memory of a 5.7 ps-resolution TDC implemented on ZedBoard. The experimental results demonstrate that the standard deviation in mean bin width is 2.4964 ps for the golden TDC, but a 0.8% degradation in the deviation is observed when 3 million SEUs are injected, which corresponds to a 0.02 ps increment. Moreover, as the number of SEUs increases, the degradation in the RMS integral non-linearity (INL) of the TDC also increases, which shows 0.04 LSB (6.8%) and 0.05 LSB (8.8%) increments for 1 million and 3 million SEUs injected, respectively. The RMS differential non-linearity (DNL) of the faulty TDC with 3 million SEUs injected shows a 0.035 LSB (0.8%) increase compared to the golden TDC.

Funding

  • Ethiopian Ministry of Education

Cite

APA

Siecha, R. T., Alemu, G., Prinzie, J., & Leroux, P. (2025). Analysis of the SEU Tolerance of an FPGA-Based Time-to-Digital Converter Using Emulation-Based Fault Injection. Electronics, 14(11), 2176. https://doi.org/10.3390/electronics14112176

Vancouver

Siecha RT, Alemu G, Prinzie J, Leroux P. Analysis of the SEU Tolerance of an FPGA-Based Time-to-Digital Converter Using Emulation-Based Fault Injection. Electronics. 2025;14(11):2176. doi:10.3390/electronics14112176

BibTeX
@article{Siecha2025,
  author = {Siecha, Roza Teklehaimanot and Alemu, Getachew and Prinzie, Jeffrey and Leroux, Paul},
  title = {Analysis of the SEU Tolerance of an FPGA-Based Time-to-Digital Converter Using Emulation-Based Fault Injection},
  journal = {Electronics},
  year = {2025},
  volume = {14},
  number = {11},
  pages = {2176},
  doi = {10.3390/electronics14112176}
}
Start for free →