Analysis of the SEU Tolerance of an FPGA-Based Time-to-Digital Converter Using Emulation-Based Fault Injection
Electronics · 27.05.2025 · 14 (11) · 2176
DOI: 10.3390/electronics14112176 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 27.05.2025. Verfasst von Roza Teklehaimanot Siecha und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ethiopian Ministry of Education.
Abstract (Originalsprache)
In application domains where severe environmental conditions are unavoidable, including high-energy physics and nuclear power plants, accurate and dependable time-to-digital converters (TDCs) are essential components. Single-event upsets (SEUs) associated with the configuration memory of field-programmable gate array (FPGA)-based implementations are becoming common sources of performance degradation even in terrestrial areas. Hence, the need to test and mitigate the effects of SEUs on FPGA-based TDCs is crucial to ensure that the design achieves reliable performance under critical conditions. The TMR SEM IP provides real-time fault injection, and dynamic SEU monitoring and correction in safety critical conditions without intervening with the functionality of the system, unlike traditional fault injection methods. This paper presents a scalable and fast fault emulation framework that tests the effects of SEUs on the configuration memory of a 5.7 ps-resolution TDC implemented on ZedBoard. The experimental results demonstrate that the standard deviation in mean bin width is 2.4964 ps for the golden TDC, but a 0.8% degradation in the deviation is observed when 3 million SEUs are injected, which corresponds to a 0.02 ps increment. Moreover, as the number of SEUs increases, the degradation in the RMS integral non-linearity (INL) of the TDC also increases, which shows 0.04 LSB (6.8%) and 0.05 LSB (8.8%) increments for 1 million and 3 million SEUs injected, respectively. The RMS differential non-linearity (DNL) of the faulty TDC with 3 million SEUs injected shows a 0.035 LSB (0.8%) increase compared to the golden TDC.
Förderung
- Ethiopian Ministry of Education
Zitieren
APA
Siecha, R. T., Alemu, G., Prinzie, J., & Leroux, P. (2025). Analysis of the SEU Tolerance of an FPGA-Based Time-to-Digital Converter Using Emulation-Based Fault Injection. Electronics, 14(11), 2176. https://doi.org/10.3390/electronics14112176
Vancouver
Siecha RT, Alemu G, Prinzie J, Leroux P. Analysis of the SEU Tolerance of an FPGA-Based Time-to-Digital Converter Using Emulation-Based Fault Injection. Electronics. 2025;14(11):2176. doi:10.3390/electronics14112176
BibTeX
@article{Siecha2025,
author = {Siecha, Roza Teklehaimanot and Alemu, Getachew and Prinzie, Jeffrey and Leroux, Paul},
title = {Analysis of the SEU Tolerance of an FPGA-Based Time-to-Digital Converter Using Emulation-Based Fault Injection},
journal = {Electronics},
year = {2025},
volume = {14},
number = {11},
pages = {2176},
doi = {10.3390/electronics14112176}
}
EUVIMED