EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Coating 1-Octanethiol-Coated Copper Nano-Ink on a Paper Substrate via Multi-Pulse Flash Light Sintering for Application in Disposable Devices

Yeonho Son, Dongho Shin, Minkyu Kang, Caroline Sunyong Lee

Electronic Materials · 2020

DOI: 10.3390/electronicmat1010004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronic Materials, 2020. Verfasst von Yeonho Son und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inkjet-printed patterns were formed on a paper substrate using anti-oxidant copper nano-ink for application to disposable electronic devices. To prevent substrate damage, the pattern was flash light sintered under ambient conditions using the multi-pulse technique. Pure copper nanoparticles were coated with 1-octanethiol for oxidation resistance using the dry-coating method. Mixing these with 1-octanol solvent at a concentration of 30 wt% produced the copper nano-ink. Photo paper was used as the substrate. The contact angle between the photo paper and copper nano-ink was 37.2° and the optimal energy density for the multi-pulse flash light sintering technique was 15.6 J/cm2. Using this energy density, the optimal conditions were an on-time of 2 ms (duty cycle of 80%) for three pulses. The resistivity of the resulting pattern was 2.8 × 10−7 Ω∙m. After bending 500 times to a radius of curvature of 30 mm, the relative resistance (ΔR/R0) of the multi-pulse flash light-sintered pattern hardly changed compared to that of the unbent pattern, while the single-pulse-sintered pattern showed dramatic increase by 8-fold compared to the unbent pattern. Therefore, the multi-pulse light sintering technique is a promising approach to produce an inkjet-printed pattern that can be applied to disposable electronic devices.

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Son, Y., Shin, D., Kang, M., & Lee, C. S. (2020). Coating 1-Octanethiol-Coated Copper Nano-Ink on a Paper Substrate via Multi-Pulse Flash Light Sintering for Application in Disposable Devices. Electronic Materials. https://doi.org/10.3390/electronicmat1010004

Vancouver

Son Y, Shin D, Kang M, Lee CS. Coating 1-Octanethiol-Coated Copper Nano-Ink on a Paper Substrate via Multi-Pulse Flash Light Sintering for Application in Disposable Devices. Electronic Materials. 2020. doi:10.3390/electronicmat1010004

BibTeX
@article{Son2020,
  author = {Son, Yeonho and Shin, Dongho and Kang, Minkyu and Lee, Caroline Sunyong},
  title = {Coating 1-Octanethiol-Coated Copper Nano-Ink on a Paper Substrate via Multi-Pulse Flash Light Sintering for Application in Disposable Devices},
  journal = {Electronic Materials},
  year = {2020},
  doi = {10.3390/electronicmat1010004}
}
Kostenlos starten →