Aluminum- and Zirconium-Based Amorphous Alloys: A Comparative Review of Glass Formation, Crystallization, Mechanical Behavior, Processing and Applications
Entropic and Disordered Matter · 2026
DOI: 10.3390/edm1020005 ↗Kurz gefasst
Fachartikel in der Zeitschrift Entropic and Disordered Matter, 2026. Verfasst von Anatolii Verkhovliuk und 3 weiteren Autor:innen. Die Arbeit nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Aluminum- and zirconium-based amorphous alloys occupy complementary positions in metallic glass research. This review compares these two alloy families within a common framework that links thermodynamic and kinetic glass-forming criteria, crystallization pathways, deformation mechanisms, and processing routes. Zr-based alloys generally combine lower critical cooling rates, wide supercooled liquid regions, and bulk castability, whereas Al-rich alloys offer low density and high specific strength but remain marginal glass formers that are commonly produced as ribbons or powders. The supercooled liquid region, ΔTx = Tx − Tg, is treated here as a kinetic processing window rather than a direct measure of ductility. Room-temperature plastic flow is discussed in terms of shear-transformation zones and shear-band initiation, propagation, multiplication, and arrest. Crystalline second phases may improve plasticity by redistributing stress and promoting the formation of multiple shear bands, but the outcome depends on their phase fraction, size, spacing, morphology, and loading mode. Recent original studies demonstrate the fabrication of dense, fully amorphous Zr-based components by laser powder bed fusion, as well as bulk Al-based glasses produced by copper mold casting or powder consolidation. The comparative analysis provides practical design guidance: combine a negative enthalpy of mixing and atomic-size mismatch with a low liquidus temperature; suppress oxygen contamination and heterogeneous nucleation; and select processing routes according to the attainable cooling rate and the stability of the supercooled liquid.
Zitieren
APA
Verkhovliuk, A., Sergiienko, R., Shcheretskyi, O., & Petrovska, S. (2026). Aluminum- and Zirconium-Based Amorphous Alloys: A Comparative Review of Glass Formation, Crystallization, Mechanical Behavior, Processing and Applications. Entropic and Disordered Matter. https://doi.org/10.3390/edm1020005
Vancouver
Verkhovliuk A, Sergiienko R, Shcheretskyi O, Petrovska S. Aluminum- and Zirconium-Based Amorphous Alloys: A Comparative Review of Glass Formation, Crystallization, Mechanical Behavior, Processing and Applications. Entropic and Disordered Matter. 2026. doi:10.3390/edm1020005
BibTeX
@article{Verkhovliuk2026,
author = {Verkhovliuk, Anatolii and Sergiienko, Ruslan and Shcheretskyi, Oleksandr and Petrovska, Svitlana},
title = {Aluminum- and Zirconium-Based Amorphous Alloys: A Comparative Review of Glass Formation, Crystallization, Mechanical Behavior, Processing and Applications},
journal = {Entropic and Disordered Matter},
year = {2026},
doi = {10.3390/edm1020005}
}
EUVIMED