EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Fracture Resistance in Teeth with Iatrogenic Perforations Repaired Using the Newly Developed Materials NeoPUTTY and NeoMTA 2: An In Vitro Comparative Study

Flora Kakoura, Kleoniki Lyroudia, Nikolaos Economides, Georgios Mikrogeorgis iD

Dentistry Journal · 14.07.2026 · 14 (7) · 437

DOI: 10.3390/dj14070437 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 14.07.2026. Verfasst von Flora Kakoura und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Endodontology, School of Dentistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hellenic Foundation for Research and Innovation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

This study aimed to assess and compare the fracture resistance (FR) of teeth with simulated root perforations repaired using NeoMTA 2, NeoPUTTY, and Biodentine.

Methods

Sixty-five single-rooted human teeth were decoronated to a standardized length of 13 mm from the apex. Their weight, mesiodistal (MD) and buccolingual (BL) dimensions were recorded for even distribution across five groups (n = 13). The teeth in the three experimental groups were instrumented. Standardized 1 mm perforations were created on the buccal root surface at a fixed 105° angle using a precision apparatus. The canals were then obturated with gutta-percha and AH Plus sealer. The perforations were subsequently repaired with NeoMTA 2, NeoPUTTY, or Biodentine. The positive control (PC) group included instrumented and perforated roots, while the negative control (NC) group comprised untreated, intact roots. All control group data used in this study were derived from previously published research. Fracture testing was conducted with a universal testing machine applying a compressive vertical load at 1 mm/min until fracture occurred. The forces were analyzed using one-way analysis of variance (ANOVA), followed by a post hoc Tukey test.

Results

The mean fracture loads were as follows: NC Group: 342.68 ± 146.45 N, PC Group: 212.66 ± 77.89 N, NeoMTA 2 Group: 314.34 ± 131.41 N, NeoPUTTY Group: 243.76 ± 93.71 N, and Biodentine Group: 263.73 ± 94.63 N. No statistically significant differences were observed among experimental groups (p > 0.05).

Conclusions

The three biomaterials showed similar strengthening effects but did not fully restore fracture strength.

Schlagwörter

Stichwörter der Autor:innen

BiodentineNeoMTA 2NeoPUTTYcalcium silicate materialsfracture resistanceroot perforation

Autor:innen und Institutionen

  • Department of Endodontology, School of Dentistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece.

ORCID-Profile: Georgios Mikrogeorgis

Förderung

  • Hellenic Foundation for Research and Innovation

Zitieren

APA

Kakoura, F., Lyroudia, K., Economides, N., & Mikrogeorgis, G. (2026). Evaluation of Fracture Resistance in Teeth with Iatrogenic Perforations Repaired Using the Newly Developed Materials NeoPUTTY and NeoMTA 2: An In Vitro Comparative Study. Dentistry Journal, 14(7), 437. https://doi.org/10.3390/dj14070437

Vancouver

Kakoura F, Lyroudia K, Economides N, Mikrogeorgis G. Evaluation of Fracture Resistance in Teeth with Iatrogenic Perforations Repaired Using the Newly Developed Materials NeoPUTTY and NeoMTA 2: An In Vitro Comparative Study. Dentistry Journal. 2026;14(7):437. doi:10.3390/dj14070437

BibTeX
@article{Kakoura2026,
  author = {Kakoura, Flora and Lyroudia, Kleoniki and Economides, Nikolaos and Mikrogeorgis, Georgios},
  title = {Evaluation of Fracture Resistance in Teeth with Iatrogenic Perforations Repaired Using the Newly Developed Materials NeoPUTTY and NeoMTA 2: An In Vitro Comparative Study},
  journal = {Dentistry Journal},
  year = {2026},
  volume = {14},
  number = {7},
  pages = {437},
  doi = {10.3390/dj14070437}
}
Kostenlos starten →