EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Internal and Marginal Shrinkage Stress in Adhesive Class III Cavities Restored with Different Resin Composite Combinations—A 3D-FEA Study

Elisa Donaria Aboucauch Grassi, Guilherme Schmitt de Andrade iD, Ana Beatriz Gomes de Carvalho, Roberta Gasparro iD, Mauro Mariniello, Angelo Aliberti, Pietro Ausiello iD, Alexandre Luiz Souto Borges iD

Dentistry Journal · 14.08.2025 · 13 (8) · 367

DOI: 10.3390/dj13080367 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 14.08.2025. Verfasst von Elisa Donaria Aboucauch Grassi und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dental Materials and Prosthodontics, Institute of Science and Technology, São Paulo State University (UNESP), 777th Eng. Francisco José…. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

To study the effects of internal and marginal polymerization shrinkage stress and distribution in different resin composite class III dental restorations in relation to the restorative technique using numerical finite element analysis (FEA).

Methods

A 3D model of a human hemi-maxilla with a sound maxillary central incisor were created. Four class III distal cavities were shaped and differently restored. Four groups of resin composite combinations were analyzed: group C (three increments of conventional composite); group B (two increments of bulk-fill composite); group FC (flowable base + three increments of conventional composite); and group FB (flowable bulk-fill base + two increments of conventional composite). The resulting four models were exported to FEA software for static structural analysis. Polymerization shrinkage was simulated using thermal analogy, and stress distribution was analyzed using the Maximum Principal Stress criterion at the marginal and internal cavity interfaces.

Results

Group FC showed the highest stress at the level in the proximal region (9.05 MPa), while group FB showed the lowest (4.48 MPa). FB also exhibited the highest internal dentin stress, indicating potential risks for long-term bond degradation. In the cavo-surface incisal angle, the average peak stress across all groups was 3.76 MPa. At the cervical cavo-surface angle, stress values were 3.3 MPa (C), ~3.36 MPa (B), 3.41 MPa (FC), and 3.27 MPa (FB).

Conclusions

Restorative technique did not significantly influence marginal stress distribution in class III composite restorations. However, the bevel area at the cervical margin showed the highest concentration of shrinkage stress.

Schlagwörter

Stichwörter der Autor:innen

class III dental restorationcomposite resinsdental materialsdental restorationfinite element analysispolymerization shrinkage

Autor:innen und Institutionen

  • Department of Dental Materials and Prosthodontics, Institute of Science and Technology, São Paulo State University (UNESP), 777th Eng. Francisco José Longo Av., São José dos Campos 12245-000, SP, Brazil.
  • Private Practice, Schmitt Odontologia, Cascavel 85801-031, PR, Brazil.
  • Department of Neuroscience, Reproductive Science and Odontostomatological Sciences, University of Naples Federico II, Via Sergio Pansini 5, 80138 Naples, Italy.

ORCID-Profile: Guilherme Schmitt de Andrade, Roberta Gasparro, Pietro Ausiello, Alexandre Luiz Souto Borges

Zitieren

APA

Grassi, E. D. A., de Andrade, G. S., de Carvalho, A. B. G., Gasparro, R., Mariniello, M., Aliberti, A., Ausiello, P., & Borges, A. L. S. (2025). Evaluation of Internal and Marginal Shrinkage Stress in Adhesive Class III Cavities Restored with Different Resin Composite Combinations—A 3D-FEA Study. Dentistry Journal, 13(8), 367. https://doi.org/10.3390/dj13080367

Vancouver

Grassi EDA, de Andrade GS, de Carvalho ABG, Gasparro R, Mariniello M, Aliberti A, et al. Evaluation of Internal and Marginal Shrinkage Stress in Adhesive Class III Cavities Restored with Different Resin Composite Combinations—A 3D-FEA Study. Dentistry Journal. 2025;13(8):367. doi:10.3390/dj13080367

BibTeX
@article{Grassi2025,
  author = {Grassi, Elisa Donaria Aboucauch and de Andrade, Guilherme Schmitt and de Carvalho, Ana Beatriz Gomes and Gasparro, Roberta and Mariniello, Mauro and Aliberti, Angelo and Ausiello, Pietro and Borges, Alexandre Luiz Souto},
  title = {Evaluation of Internal and Marginal Shrinkage Stress in Adhesive Class III Cavities Restored with Different Resin Composite Combinations—A 3D-FEA Study},
  journal = {Dentistry Journal},
  year = {2025},
  volume = {13},
  number = {8},
  pages = {367},
  doi = {10.3390/dj13080367}
}
Kostenlos starten →