EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Does the Type of Resin Luting Material Affect the Bonding of CAD/CAM Materials to Dentin?

Burcu Dikici iD, Elif Türkeş Başaran iD, Esra Can

Dentistry Journal · 19.01.2025 · 13 (1) · 41

DOI: 10.3390/dj13010041 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 19.01.2025. Verfasst von Burcu Dikici und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Restorative Dentistry, Faculty of Dentistry, Yeditepe University, İstanbul 34728, Turkey. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background/Objectives: This study aimed to investigate the microtensile bond strength (µTBS) of composite-based (Cerasmart), polymer-infiltrated (Vita Enamic), and feldspathic (Cerec) CAD/CAM blocks luted to dentin using a dual-cure resin cement (LinkForce), as well as micro-hybrid (G-aenial) and flowable composites (G-aenial Universal Flo), and evaluate the microhardness (HV) of luting materials through the CAD/CAM blocks.

Methods

Cerasmart, Enamic, and Cerec were luted to dentin using three luting materials; LinkForce, G-aenial, and Universal Flo (n = 5). For HV, 117 disk-shaped specimens from LinkForce, G-aenial, and Universal Flo (n = 13) were polymerized through 3 mm thick CAD/CAM. Thirty-nine light-cured specimens without CAD/CAM were used as control. Following 24 h storage, the µTBS and HV were evaluated. Data were analyzed using the two-way ANOVA and post hoc Tukey tests (p < 0.05).

Results

The µTBS to dentin and HV were significantly influenced by the type of luting material and CAD/CAM material. With all the CAD/CAM materials, LinkForce and Universal Flo exhibited a significantly similar µTBS to that of dentin (p > 0.05). Compared with the control group, all the HV values of the luting materials decreased significantly (p < 0.05).

Conclusions

Heavily filled flowable composites exhibit a bonding effectiveness similar to that of dual-cure resin cements. All the luting materials showed similar HV when polymerized through the polymer-infiltrated CAD/CAM material.

Schlagwörter

Stichwörter der Autor:innen

CAD/CAMbond strengthheavily filled flowable compositeluting materialmicrohardness

Autor:innen und Institutionen

  • Department of Restorative Dentistry, Faculty of Dentistry, Yeditepe University, İstanbul 34728, Turkey.

ORCID-Profile: Burcu Dikici, Elif Türkeş Başaran

Zitieren

APA

Dikici, B., Türkeş Başaran, E., & Can, E. (2025). Does the Type of Resin Luting Material Affect the Bonding of CAD/CAM Materials to Dentin?. Dentistry Journal, 13(1), 41. https://doi.org/10.3390/dj13010041

Vancouver

Dikici B, Türkeş Başaran E, Can E. Does the Type of Resin Luting Material Affect the Bonding of CAD/CAM Materials to Dentin?. Dentistry Journal. 2025;13(1):41. doi:10.3390/dj13010041

BibTeX
@article{Dikici2025,
  author = {Dikici, Burcu and Türkeş Başaran, Elif and Can, Esra},
  title = {Does the Type of Resin Luting Material Affect the Bonding of CAD/CAM Materials to Dentin?},
  journal = {Dentistry Journal},
  year = {2025},
  volume = {13},
  number = {1},
  pages = {41},
  doi = {10.3390/dj13010041}
}
Kostenlos starten →