Impact of Scanbody Geometry and CAD Software on Determining 3D Implant Position
Dentistry Journal · 03.04.2024 · 12 (4) · 94
DOI: 10.3390/dj12040094 ↗Kurz gefasst
Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 03.04.2024. Verfasst von Judith Kropfeld und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, University Hospital Erlangen, Glückstrasse 11, 91054 Erlangen, Germany. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Straumann GmbH, Freiburg im Breisgau, Germany, NT-Trading GmbH & Co. KG., Karlsruhe, Germany.
Abstract (Originalsprache)
The implementation of CAD software in the digital production of implant prosthetics stands as a pivotal aspect of clinical dentistry, necessitating high precision in the alignment of implant scanbodies. This study investigates the influence of scanbody geometry and the method of superimposing in CAD software when determining 3D implant position. A standardized titanium model with three bone-level implants was digitized to create reference STL files, and 10 intraoral scans were performed on Medentika and NT-Trading scanbodies. To determine implant position, the generated STL files were imported into the Exocad CAD software and superimposed—automatically and manually—with the scanbody geometries stored within the software’s shape library. Position accuracy was determined by a comparison of the 3D-defined scanbody points from the STL matching files with those from the reference STL files. The R statistical software was used for the evaluation of the data. In addition, mixed linear models and a significance level of 0.05 were applied to calculate the p-values. The manual overlay method was significantly more accurate than the automatic overlays for both scanbody types. The Medentika scanbodies showed slightly superior precision compared to the NT-Trading scanbodies. Both scanbody geometry and the type of alignment in the CAD software significantly affect digital workflow accuracy. Manual verification and adjustment of the automatic alignment process are essential for precise implant positioning.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Prosthodontics, University Hospital Erlangen, Glückstrasse 11, 91054 Erlangen, Germany.
- Institute of Medical Informatics, Biometry and Epidemiology (IMBE) of the Friedrich-Alexander-University, Erlangen-Nuremberg, Waldstrasse 6, 91054 Erlangen, Germany.
- Department of Oral and Cranio-Maxillofacial Surgery, University Hospital Erlangen, Glückstrasse 11, 91054 Erlangen, Germany.
ORCID-Profile: Constantin Motel, Ragai Edward Matta
Förderung
- Straumann GmbH, Freiburg im Breisgau, Germany
- NT-Trading GmbH & Co. KG., Karlsruhe, Germany
Zitieren
APA
Kropfeld, J., Berger, L., Adler, W., Schulz, K. L., Motel, C., Wichmann, M., & Matta, R. E. (2024). Impact of Scanbody Geometry and CAD Software on Determining 3D Implant Position. Dentistry Journal, 12(4), 94. https://doi.org/10.3390/dj12040094
Vancouver
Kropfeld J, Berger L, Adler W, Schulz KL, Motel C, Wichmann M, et al. Impact of Scanbody Geometry and CAD Software on Determining 3D Implant Position. Dentistry Journal. 2024;12(4):94. doi:10.3390/dj12040094
BibTeX
@article{Kropfeld2024,
author = {Kropfeld, Judith and Berger, Lara and Adler, Werner and Schulz, Katja Leonie and Motel, Constantin and Wichmann, Manfred and Matta, Ragai Edward},
title = {Impact of Scanbody Geometry and CAD Software on Determining 3D Implant Position},
journal = {Dentistry Journal},
year = {2024},
volume = {12},
number = {4},
pages = {94},
doi = {10.3390/dj12040094}
}
EUVIMED