EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Accuracy of intraoral scanners for full-arch implant scanning in the Maxilla using horizontal scanbody

Abidiel Silva Guimarães iD, Thais Silva Mendonça, Paulo Sergio Borella, Gus Khalil, Junying Li, Sandra Al-Tarawneh, Lawrence Gonzaga Lopes, Gustavo Mendonça iD

PLOS One · 05.12.2025 · 20 (12) · e0332174

DOI: 10.1371/journal.pone.0332174 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 05.12.2025. Verfasst von Abidiel Silva Guimarães und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Oral Rehabilitation and Prevention, School of Dentistry, Federal University of Goiás, Goiania, Goiás, Brazil. Hauptthemen laut MEDLINE: Dental Implants, Maxilla, Imaging, Three-Dimensional. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CNPq (National Council of Scientific and Technological Development, CAPES, School of Dentistry of Federal University of Goiás.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This laboratory study evaluated the accuracy of six intraoral scanner models (Primescan; Trios 4; Trios 5; Medit i700; i900; Itero Lumina) compared to a desktop scanner (E4) used as a control. Additionally, the influence of the scan body design, horizontal (SBH) and short cylindrical (SBC), was investigated through two different software. A master model containing six implants was used, and the scanning workflow was standardized and repeated ten times (N = 10). The data were analyzed in terms of trueness and precision using two distinct types of analysis: one performed in Blender software (Stichting Blender Foundation) and the other in Evalumap software (Claronav). The lower the number the better precision and accuracy were noted. The position deviation (3D_dev) and angular deviation (Ang_dev) were evaluated. Statistical analyses were conducted using the Kruskal-Wallis test, Bonferroni correction, and multiple comparisons. Trueness (n = 1,437) showed a significant effect on 3D_dev (p < 0.001) and Ang_dev (p < 0.001), as well as for precision (n = 6,478) in 3D_dev (p < 0.001) and Ang_dev (p < 0.001). The lowest median values for trueness in 3D_dev were observed for the i900L (35.25) and in Ang_dev for Primescan (0.35), whereas the lowest precision values for 3D_dev were found for the iTero Lumina (18.81μm) and Ang_dev in i900L (0.19 μm). Regarding the scan body type, a significant difference was observed between SBH and SBC for both trueness and precision, with SBH presenting lower angular deviation values and SBC exhibiting lower 3D position deviations. Multiple comparisons revealed significant differences for the E4 scanner across all analyses. The choice of scanner impacts both the trueness and precision of the generated models, as does the scan body type and the software.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental ImplantsMaxillaImaging, Three-DimensionalHumansSoftware

Substanzen

Dental Implants

Autor:innen und Institutionen

  • Department of Oral Rehabilitation and Prevention, School of Dentistry, Federal University of Goiás, Goiania, Goiás, Brazil.
  • Department of Prosthodontics, School of Dentistry, Virginia Commonwealth University, Richmond, Virginia, United States of America.
  • AOX Digital Designs, Orlando, Florida, United States of America.
  • Department of Biological and Materials Sciences & Prosthodontics, School of Dentistry, University of Michigan, Ann Arbor, Michigan, United States of America.

ORCID-Profile: Abidiel Silva Guimarães, Gustavo Mendonça

Förderung

  • CNPq (National Council of Scientific and Technological Development
  • CAPES
  • School of Dentistry of Federal University of Goiás
  • School of Dentistry of Virginia Commonwealth University

Zitieren

APA

Guimarães, A. S., Mendonça, T. S., Borella, P. S., Khalil, G., Li, J., Al-Tarawneh, S., Lopes, L. G., & Mendonça, G. (2025). Accuracy of intraoral scanners for full-arch implant scanning in the Maxilla using horizontal scanbody. PLOS One, 20(12), e0332174. https://doi.org/10.1371/journal.pone.0332174

Vancouver

Guimarães AS, Mendonça TS, Borella PS, Khalil G, Li J, Al-Tarawneh S, et al. Accuracy of intraoral scanners for full-arch implant scanning in the Maxilla using horizontal scanbody. PLOS One. 2025;20(12):e0332174. doi:10.1371/journal.pone.0332174

BibTeX
@article{Guimares2025,
  author = {Guimarães, Abidiel Silva and Mendonça, Thais Silva and Borella, Paulo Sergio and Khalil, Gus and Li, Junying and Al-Tarawneh, Sandra and Lopes, Lawrence Gonzaga and Mendonça, Gustavo},
  title = {Accuracy of intraoral scanners for full-arch implant scanning in the Maxilla using horizontal scanbody},
  journal = {PLOS One},
  year = {2025},
  volume = {20},
  number = {12},
  pages = {e0332174},
  doi = {10.1371/journal.pone.0332174}
}
Kostenlos starten →