EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CBCT Images to an STL Model: Exploring the “Critical Factors” to Binarization Thresholds in STL Data Creation

Takashi Kamio iD, Taisuke Kawai

Diagnostics · 01.03.2023 · 13 (5) · 921

DOI: 10.3390/diagnostics13050921 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Diagnostics, online erschienen am 01.03.2023. Verfasst von Takashi Kamio und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Oral and Maxillofacial Radiology, School of Life Dentistry at Tokyo, The Nippon Dental University, 1-9-20 Fujimi, Chiyoda-ku, Tokyo 102…. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In-house fabrication of three-dimensional (3D) models for medical use has become easier in recent years. Cone beam computed tomography (CBCT) images are increasingly used as source data for fabricating osseous 3D models. The creation of a 3D CAD model begins with the segmentation of hard and soft tissues of the DICOM images and the creation of an STL model; however, it can be difficult to determine the binarization threshold in CBCT images. In this study, how the different CBCT scanning and imaging conditions of two different CBCT scanners affect the determination of the binarization threshold was evaluated. The key to efficient STL creation through voxel intensity distribution analysis was then explored. It was found that determination of the binarization threshold is easy for image datasets with a large number of voxels, sharp peak shapes, and narrow intensity distributions. Although the intensity distribution of voxels varied greatly among the image datasets, it was difficult to find correlations between different X-ray tube currents or image reconstruction filters that explained the differences. The objective observation of voxel intensity distribution may contribute to the determination of the binarization threshold for 3D model creation.

Schlagwörter

Stichwörter der Autor:innen

3D printingDICOMSTL datacomputer-aided designcone beam computed tomographydentistryimagingoral and maxillofacial surgeryradiology

Autor:innen und Institutionen

  • Department of Oral and Maxillofacial Radiology, School of Life Dentistry at Tokyo, The Nippon Dental University, 1-9-20 Fujimi, Chiyoda-ku, Tokyo 102-8159, Japan.

ORCID-Profile: Takashi Kamio

Zitieren

APA

Kamio, T., & Kawai, T. (2023). CBCT Images to an STL Model: Exploring the “Critical Factors” to Binarization Thresholds in STL Data Creation. Diagnostics, 13(5), 921. https://doi.org/10.3390/diagnostics13050921

Vancouver

Kamio T, Kawai T. CBCT Images to an STL Model: Exploring the “Critical Factors” to Binarization Thresholds in STL Data Creation. Diagnostics. 2023;13(5):921. doi:10.3390/diagnostics13050921

BibTeX
@article{Kamio2023,
  author = {Kamio, Takashi and Kawai, Taisuke},
  title = {CBCT Images to an STL Model: Exploring the “Critical Factors” to Binarization Thresholds in STL Data Creation},
  journal = {Diagnostics},
  year = {2023},
  volume = {13},
  number = {5},
  pages = {921},
  doi = {10.3390/diagnostics13050921}
}
Kostenlos starten →